Abstract:By adopting polymer/silica hybrid rib waveguide structure,a low power-consumption Mach-Zehnder interferometer(MZI) thermo-optic switch is designed and fabricated with techniques including chemical vapor deposition(CVD),spin-coating,wet-etching,etc.The wavelength dispersions of waveguide core,buffer and cladding materials are measured,and output power and output spectrum are theoretically analyzed.Switching response and spectrum characteristics are measured using a tunable laser as input source.Under 1 550 nm wavelength,the driving power of the switch is about 7.8 mW,the extinction ratio between ON state and OFF state is up to 32.6 dB,and under the function of pure square-wave switching signal(peak-to-peak amplitude of 3Vpp),the rising time and falling time are 107 μs and 71 μs,respectively.Keeping applying the driving power at 1 550 nm wavelength on the device,the measured spectrum width is about 50 nm(1 520-1 570 nm) with an extinction ratio over 18 dB.A noise-level-tunable driving source is developed with NE555 and other integrated circuits,and then the driving-noise-tolerance characteristics are investigated.Experimental results indicate that the allowed maximum noise-level is about 1.1 Vpp with a required extinction ratio larger than 10 dB.The proposed results in this paper are of good meanings for practical applications of such thermo-optic switches with the hybrid waveguide structure.

Fabrication and Driving-Noise-tolerance Characteristics of Wide-Spectrum Polymer Thermo-Optic Switch

Driving-NoiseTolerant Broadband Polymer/Silica Hybrid Thermo-Optic Switch with Low Power Consumption (vol 31, pg 299, 2012)

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

Fabrication of A Polymer-On-Silica Hybrid Thermo-Optic Switch with Fast Response Time and Low Power Consumption

Design and Fabrication of an Organic/inorganic Hybrid Thermo-Optic Switch with Low Power Consumption

850-Nm Polymeric Waveguide Thermo-Optic Switch with Low Power-Consumption

Polymeric Thermo-Optic Switch Based on Strip-Loaded Optical Waveguide

Low-power and Wide-Band 1 × 8 Silica Waveguide Optical Switch

High efficiency thermal optical switch based on suspended polymer waveguide

Design and Analysis of a Polymer Mach-Zehnder Interferometer Electro-Optic Switch over a Wide Spectrum of &Lt;inline-Formula><math Display="inline" Overflow="scroll"><mrow><mn>110</mn><mspace Width="0.3em" /&Gt;<mi>nm</mi></mrow></math></inline-Formula>

Fabrication and Characterization on an Organic/inorganic 2 × 2 Mach–Zehnder Interferometer Thermo-Optic Switch

Manufacture Tolerance Analysis and Control for a Polymer-on-silicon Mach-Zehnder-interferometer-based Electro-Optic Switch

Polymeric Waveguide MZI Thermo-Optic Mode Switch Based on Asymmetric Directional Coupler

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

Thermooptic Switch Based on Photonic-Crystal Line-Defect Waveguides

&Lt;title>design and Fabrication of MMI-MZI Optical Switch in GaAs/GaAIAs</title>

Polymer M-Z Thermal Optical Switch at 532-Nm Based on Wet Etching and UV-Writing Waveguide.

Low-power-consumption Polymer Mach Zehnder Interferometer Thermo-Optic Switch at 532 Nm Based on a Triangular Waveguide

Design and fabrication of MMI-MZI optical switch in GaAs/GaAlAs

Thermo-Optic Mode Switch Based on an Asymmetric Mach–Zehnder Interferometer

Low Power 1×4 Polymer/sio2 Hybrid Waveguide Thermo-Optic Switch