Abstract:Liquid crystals are widely used in photonics because of their profound electro-optic properties. However, the slow switching speeds (milliseconds) and the fluid nature of liquid crystals restrict their potential use in integrated photonics. In this work, polymer-stabilized liquid crystals are utilized as the functional material to improve the response time with a polymer network that helps pre-orientate the liquid crystal. Additionally, plasmonic slot structures are simultaneously employed to minimize the switch voltage by confining the optical field within the electrode spacing at subwavelength scales. Thanks to the large overlap of the optical and electric fields, the scattering states of the polymer-stabilized liquid crystal can be effectively manipulated to modulate the loss of the propagating wave, resulting in strong optical attenuation in the integrated photonic platform. Specifically, a plasmonic enhanced polymer-stabilized liquid crystal photonic device for operation at 1550 nm, which has a length of only 10 mu m and shows an extinction ratio of 0.38 dB mu m-1, with a power consumption of less than 6 mu W and a response time approximate to 20 mu s, resulting in a figure-of-merit of 0.012 mW. A scheme of on-chip integrated optical attenuators for plasmonic slot waveguide-enhanced electro-optical properties of polymer-stabilized liquid crystal film is proposed. This prototype reduces the response time and improves the modulation efficiency of the liquid crystal-based integrated photonic device, resulting in a compact and energy-efficient platform for on-chip optical modulation. image

Nanosecond Response Electro‐optic Switch Based on High Cost‐effective Poled Polymeric Material

Fabrication and measurement of DR19/PMMA-based electro-optic switch with nanosecond response time

High-speed Electro-Optic Switch Using Buried Electrode Structure in Polymer Mach–Zehnder Waveguide

NANOSECOND RESPONSE POLYMER ELECTRO-OPTIC SWITCH WITH HIGH POLING EFFICIENCY AND GOOD LONG-TERM STABILITY

Electro-Optic Polymer Assisted Optical Switch Based on Silicon Slot Structure

Optimized Design and Fabrication of Nanosecond Response Electro–optic Switch Based on Ultraviolet-Curable Polymers

Plasmonic‐Enhanced Polymer‐Stabilized Liquid Crystals Switching for Integrated Optical Attenuation

Low Power Consumption Thermo‐optic Switch Based on DR1/PMMA

High-speed Electro-Optic Switch Based on Nonlinear Polymer-Clad Waveguide Incorporated with Quasi-in-plane Coplanar Waveguide Electrodes

On-chip Integrated Optical Switch Based on Polymer Waveguides

Properties of Dr1/Pmma-Co-Gma for High Speed Electro-Optical Switch

Polymer M-Z Thermal Optical Switch at 532-Nm Based on Wet Etching and UV-Writing Waveguide.

650-Nm 1 × 2 Polymeric Thermo-Optic Switch with Low Power Consumption.

850-Nm Polymeric Waveguide Thermo-Optic Switch with Low Power-Consumption

Nanosecond Bias-Free Mach–Zehnder Electro-Optic Switch Based on Dye-Doped Polymer DR1/SU-8 and Microstrip Line Electrode

Polymer Thermal Optical Switch for a Flexible Photonic Circuit

Fluorinated Photopolymer Thermo-Optic Switch Arrays with Dielectric-Loaded Surface Plasmon Polariton Waveguide Structure

Multimode Interference Waveguide Switch of Electro-Optic Polymer with Tapered Access Waveguides

Uv Curable Electro-Optic Polymer Switch Based on Direct Photodefinition Technique

Demonstration of a High-Speed Electro-Optic Switch with Passive-to-active Integrated Waveguide Based on SU-8 Material

Low Loss Vertically Coupled Polymeric Electro-Optic Switch