Abstract:By adopting polymer/silica hybrid rib waveguide structure,a low power-consumption Mach-Zehnder interferometer(MZI) thermo-optic switch is designed and fabricated with techniques including chemical vapor deposition(CVD),spin-coating,wet-etching,etc.The wavelength dispersions of waveguide core,buffer and cladding materials are measured,and output power and output spectrum are theoretically analyzed.Switching response and spectrum characteristics are measured using a tunable laser as input source.Under 1 550 nm wavelength,the driving power of the switch is about 7.8 mW,the extinction ratio between ON state and OFF state is up to 32.6 dB,and under the function of pure square-wave switching signal(peak-to-peak amplitude of 3Vpp),the rising time and falling time are 107 μs and 71 μs,respectively.Keeping applying the driving power at 1 550 nm wavelength on the device,the measured spectrum width is about 50 nm(1 520-1 570 nm) with an extinction ratio over 18 dB.A noise-level-tunable driving source is developed with NE555 and other integrated circuits,and then the driving-noise-tolerance characteristics are investigated.Experimental results indicate that the allowed maximum noise-level is about 1.1 Vpp with a required extinction ratio larger than 10 dB.The proposed results in this paper are of good meanings for practical applications of such thermo-optic switches with the hybrid waveguide structure.

Fast and Low-Power Thermo-Optic Switch Based on Organic-Inorganic Hybrid Strip-Loaded Waveguides.

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

Strip-loaded Waveguide Electro-optic Modulator Based on Bonded Organic-inorganic Hybrid Material

Design and Fabrication of an Organic/inorganic Hybrid Thermo-Optic Switch with Low Power Consumption

Flexible Waveguide Integrated Thermo-Optic Switch Based on TiO2 Platform

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

Thermooptic Switch Based on Photonic-Crystal Line-Defect Waveguides

A Silicon-on-insulator-based Thermo-Optic Waveguide Switch with Low Insertion Loss and Fast Response

Thermo-optic Properties of Sol-Gel-fabricated Organic–inorganic Hybrid Waveguides

Low Power Consumption Thermo‐optic Switch Based on DR1/PMMA

High efficiency thermal optical switch based on suspended polymer waveguide

Compact Su8-Silica Hybrid Thermo-Optic Switch With Low Power Consumption

Polyimide-waveguide-based Thermal Optical Switch Using Total-Internal-reflection Effect

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

A Multimode Interference Polymer-Silica Hybrid Waveguide 2x2 Thermo-Optic Switch

A Compact Silicon Nano-Wire Waveguide Optic Switch

Compact 1 X N Thermo-Optic Switches Based on Silicon Photonic Wire Waveguides.

All‐Optical Organic–Inorganic Hybrid Waveguide Switches Based on Photothermal Effect of Au‐MOF Composites

Digital Optical Switch Based on Fast Thermal Gradient Switching in InGaAsP Waveguides

Fabrication and Driving-Noise-tolerance Characteristics of Wide-Spectrum Polymer Thermo-Optic Switch

Highly integrated 3×3 silicon thermo-optical switch using a single combined phase shifter for optical interconnects.