Abstract:A polymer/silica hybrid 3D waveguide thermo-optic (TO) mode switch based on cascaded asymmetric directional couplers (ADCs) is theoretically designed and simulated, where the spatial modes of a few-mode silica waveguide can be switched to various single-mode polymer waveguides placed above the few-mode silica waveguide. A beam propagation method is employed to optimize the dimensional parameters of the mode switch to convert the L P 11 a and L P 11 b modes of the few-mode silica waveguide to the L P 01 mode of two single-mode polymer waveguides using the cascaded ADC 1 and ADC 2. The coupling ratios are higher than 96.4% (93.4%) and 95.1% (92.8%) for the ADC 1 and ADC 2, respectively, under the TE (TM) polarization within the wavelength range from 1530 to 1570 nm, which shows good wavelength independence. Furthermore, the monolayer graphene is introduced as the heating electrode and buried on the surface of the polymer core to increase the heating efficiency and reduce the power consumption. The power consumption for ADC 1 and ADC 2 is 16.69 mW and 17.35 mW, respectively. Compared to the traditional TO switch with an aluminum (Al) heating electrode, the heating efficiency of the presented device can be improved by ∼ 30 % . Moreover, the response speed of the TO mode switch with a 3D waveguide structure was also significantly improved. Compared to the device with Al electrodes, the introduced graphene electrodes can improve the switching speed of the device by ∼ 60 % . The presented TO mode switch with its small size and easy integration should find applications in reconfigurable mode division multiplexing systems.

All‐Optical Organic–Inorganic Hybrid Waveguide Switches Based on Photothermal Effect of Au‐MOF Composites

Embedded Waveguide Thermo-optic Switch Based on Novel Organic-inorganic Hybrid Material

Fast and Low-Power Thermo-Optic Switch Based on Organic-Inorganic Hybrid Strip-Loaded Waveguides.

650-nm All-Polymer Thermo-Optic Waveguide Switch Arrays Based on Novel Organic–Inorganic Grafting PMMA Materials

Au Nanoparticles-Doped Polymer All-Optical Switches Based on Photothermal Effects

Polymeric Thermo-Optic Switch Based on Strip-Loaded Optical Waveguide

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

Low Power 1×4 Polymer/sio2 Hybrid Waveguide Thermo-Optic Switch

Design and Fabrication of an Organic/inorganic Hybrid Thermo-Optic Switch with Low Power Consumption

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

Flexible Waveguide Integrated Thermo-Optic Switch Based on TiO2 Platform

Polymer/silica Hybrid 3D Waveguide Thermo-Optic Mode Switch Based on Cascaded Asymmetric Directional Couplers

Optical switch based on multimode interference coupler

Study of Hybrid SiO_2/polymer Y Branch Waveguide Thermo-Optic Switches

Thermal Field Analysis of Polymer/silica Hybrid Waveguide Thermo-Optic Switch

Polymer Thermal Optical Switch for a Flexible Photonic Circuit

A nonvolatile plasmonic switch employing photochromic molecules.

A Multimode Interference Polymer-Silica Hybrid Waveguide 2x2 Thermo-Optic Switch

Compact Su8-Silica Hybrid Thermo-Optic Switch With Low Power Consumption

Thermo-optic waveguide gate switch arrays based on direct UV-written highly fluorinated low-loss photopolymer.

A Thermosalient and Mechanically Compliant Organic Crystalline Optical Waveguide Switcher