Abstract:We present the design and performances of a broadband 1 × 2 mode-independent thermo-optic (TO) switch based on Mach-Zehnder interferometer (MZI) with multimode interferometer (MMI). The MZI adopts a Y-branch structure as the 3-dB power splitter and a MMI as the coupler, which are designed to be insensitive to the guided modes. By optimizing the structural parameters of the waveguides, mode-independent transmission and switching functions for E11 and E12 modes can be implemented in the C + L band, and the mode content of the outputs is the same as the mode content of the inputs. We proved the working principle of our design based on polymer platform, which was fabricated by using ultraviolet lithography and wet-etching methods. The transmission characteristics for E11 and E12 modes were also analyzed. With the driving power of 5.9 mW, the measured extinction ratios of the switch for E11 and E12 modes are larger than 13.3 dB and 13.1 dB, respectively, over a wavelength range of 1530 nm to 1610 nm. The insertion losses of the device are 11.7 dB and 14.2 dB for E11 and E12 modes, respectively, at 1550 nm wavelength. The switching times of the device are less than 840 µs. The presented mode-independent switch can be applied in reconfigurable mode-division multiplexing systems.

Optical switch based on multimode interference coupler

Study of polymeric optical switches based on multimode interference coupler

Research Progress on Multimode Interference Switches

Three-wavelength Rearrangeable 3×3 Photonic Switch

Compact All-Optical Switches Based on Photon-Induced Suppression of Mode Interference

Optical Mode Switch Based on Multimode Interference Couplers

Analysis on Multimode Interference Coupler-Based 1×3 Optical Switch with Mono-Compound Modulation Region

Design and fabrication of MMI-MZI optical switch in GaAs/GaAlAs

&Lt;title>design and Fabrication of MMI-MZI Optical Switch in GaAs/GaAIAs</title>

Compact waveguide devices based on multimode interference by using area modulation method

Compact variable optical attenuator based on multimode interference coupler

Compact 2×2 Parabolic Multimode Interference Thermo–optic Switches Based on Fluorinated Photopolymer

Integrated Sio2/Sion/Sio2 Thermo-Optical Switch Based On The Multimode Interference Effect

Integrated SiO<sub>2</sub>/SiON/SiO<sub>2</sub>Thermo-Optical Switch Based on the Multimode Interference Effect

Compact dual-mode thermo-optic switch based on multimode interference coupler

1 × 2 Mode-Independent Polymeric Thermo-Optic Switch Based on a Mach-Zehnder Interferometer with a Multimode Interferometer.

Mmi Optical Couplers and Switches with Soi Technology

Low electric power drived thermo-optic multimode interference switches with tapered heating electrodes

2×2 Polymeric Electro-Optic MZI Switch Using Multimode Interference Couplers

Four-mode Thermo-Optic Switch Based on Y-junctions Integrated with Multimode Interferometers

Low Switching Power 2×2 Thermo-Optic Switch Using Direct Ultraviolet Photolithography Process