Abstract:Two integrated 1 2 and 1 4 polymer electro-optic switches based on Y-fed directional couplers are designed and optimized in terms of the coupled mode theory, electro-optic modulation theory, conformal transforming method and image method. The principle of the 1 2 electro-optic switch is described. Parameters including the core size, buffer layer thickness, electrode thickness, electrode width and electrode gap are optimized. Simulation results show that the length of the designed 1 2 switch is about 3.126 mm, the driving voltages of the two branches are as low as 0.891 and -0.891 V, respectively, the crosstalk and insertion loss are less than -30 and 1.42 dB, respectively, within the operation wavelength from 1527 to 1574 nm. Under the same driving voltages, the 1 4 optical switch with a total length of less than 7 mm can be switched by altering the voltages applied on the electrodes of the three Y-fed directional couplers. Simulation results from the beam propagation method (BPM) indicate that the two designed devices exhibit favorable switching functions.

A 1 × 4 Polymeric Digital Optical Switch Based on the Thermo-Optic Effect

Low Crosstalk 1/spl Times/2 Thermooptic Digital Optical Switch with Integrated S-bend Attenuator

Low Crosstalk Y-branch 1×2 Thermo-Optic Digital Optical Switch

Polymer Thermo-Optic Switches with Y-Branch

Compact 1 X N Thermo-Optic Switches Based on Silicon Photonic Wire Waveguides.

Polymeric Thermo-Optic Digital Optical Switches

2 × 3 Thermo-optical Switch Utilizing Total Internal Reflection

Study of 1×2 total-internal-reflection thermo-optic polymeric switches

Low Power 1×4 Polymer/sio2 Hybrid Waveguide Thermo-Optic Switch

An Easily Operating Polymer 1×4 Optical Waveguide Switch Matrix Based on Vertical Couplers

High-speed compact silicon digital optical switch with slot structure

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

Four-mode Thermo-Optic Switch Based on Y-junctions Integrated with Multimode Interferometers

Design of Integrated 1×2, 1×4 Low Driving Voltage Polymer Electro-Optic Switches Based on Y-fed Directional Couplers

A Novel 2 X 3 Optical Switch Utilizing Total Internal Reflection Based On Thermo-Optical Effect Of Polymer

LiNbO3 based 1x2 Y-branch digital optical switch integrated with S-bend variable optical attenuator

Highly integrated 3×3 silicon thermo-optical switch using a single combined phase shifter for optical interconnects.

Study of polymeric optical switches based on multimode interference coupler

Three-Dimensional Polymer Thermo-Optic Switch at 650 Nm

Scalable Nonblocking &Lt;inline-Formula> &Lt;tex-Math Notation="latex">$4\times4$ &Lt;/tex-Math> &Lt;/inline-Formula> Silicon Optical Switch Based on Dual-Microring Resonators

Optical switch based on multimode interference coupler