Abstract:Polymer thermal optical switches have low power consumption and 532 nm is the communication window of polymer fiber. Polymer thermal optical switches at 532 nm are rarely reported, because of switching extinction ratio properties that are restricted by modes of the waveguide. Single mode waveguide at 532 nm is hard to fabricate due to the dissolution of core and cladding materials. A polymer M-Z thermal optical switch at 532 nm was first demonstrated based on the wet etching method. The proposed thermal optical switch was consisted of silica substrate, photosensitive polymer core, and cladding material. The device was fabricated and tested with the power consumption of 6.55mW, extinction of 4.8 dB, and switching time of 0.23 ms (rise)/0.28 ms (down). An optimized switch structure combining with the UV-writing technique and graphene thermal conduction layer was proposed based on the experiments above. A side electrode was designed to reduce the power consumption and the switching time. The optimized device was calculated to have a power consumption of 1.5 mW. The switching time of the UV-writing device was simulated to be 18.2 μs (rise) and 85 μs (down). The device is promising in the wearable device and laser radar area.

650-Nm 1 × 2 Polymeric Thermo-Optic Switch with Low Power Consumption.

850-Nm Polymeric Waveguide Thermo-Optic Switch with Low Power-Consumption

Three-Dimensional Polymer Thermo-Optic Switch at 650 Nm

Low Power Consumption Thermo‐optic Switch Based on DR1/PMMA

Low Power Consumption Thermo-Optic Switch Formed by an Integrated Processing Method.

Optimized Design and Fabrication of Polymer/Silica Thermo-Optic Switch with Low Power Consumption

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

Polymer M-Z Thermal Optical Switch at 532-Nm Based on Wet Etching and UV-Writing Waveguide.

Low Switching Power 2×2 Thermo-Optic Switch Using Direct Ultraviolet Photolithography Process

A 1 × 4 Polymeric Digital Optical Switch Based on the Thermo-Optic Effect

Polymer Thermo-Optic Switches with Y-Branch

Polymeric Thermo-Optic Switch Based on Strip-Loaded Optical Waveguide

2 × 3 Thermo-optical Switch Utilizing Total Internal Reflection

Study of 1×2 total-internal-reflection thermo-optic polymeric switches

Low Power 1×4 Polymer/sio2 Hybrid Waveguide Thermo-Optic Switch

A Novel 2 X 3 Optical Switch Utilizing Total Internal Reflection Based On Thermo-Optical Effect Of Polymer

Low Crosstalk Y-branch 1×2 Thermo-Optic Digital Optical Switch

Driving-NoiseTolerant Broadband Polymer/Silica Hybrid Thermo-Optic Switch with Low Power Consumption (vol 31, pg 299, 2012)

Design and Fabrication of an Organic/inorganic Hybrid Thermo-Optic Switch with Low Power Consumption

Fast polymer thermo-optic switch with silica under-cladding

Fast Response 2×2 Thermo-Optic Switch with Polymer/silica Hybrid Waveguide