Abstract:A polymer/silica hybrid 3D waveguide thermo-optic (TO) mode switch based on cascaded asymmetric directional couplers (ADCs) is theoretically designed and simulated, where the spatial modes of a few-mode silica waveguide can be switched to various single-mode polymer waveguides placed above the few-mode silica waveguide. A beam propagation method is employed to optimize the dimensional parameters of the mode switch to convert the L P 11 a and L P 11 b modes of the few-mode silica waveguide to the L P 01 mode of two single-mode polymer waveguides using the cascaded ADC 1 and ADC 2. The coupling ratios are higher than 96.4% (93.4%) and 95.1% (92.8%) for the ADC 1 and ADC 2, respectively, under the TE (TM) polarization within the wavelength range from 1530 to 1570 nm, which shows good wavelength independence. Furthermore, the monolayer graphene is introduced as the heating electrode and buried on the surface of the polymer core to increase the heating efficiency and reduce the power consumption. The power consumption for ADC 1 and ADC 2 is 16.69 mW and 17.35 mW, respectively. Compared to the traditional TO switch with an aluminum (Al) heating electrode, the heating efficiency of the presented device can be improved by ∼ 30 % . Moreover, the response speed of the TO mode switch with a 3D waveguide structure was also significantly improved. Compared to the device with Al electrodes, the introduced graphene electrodes can improve the switching speed of the device by ∼ 60 % . The presented TO mode switch with its small size and easy integration should find applications in reconfigurable mode division multiplexing systems.

Fast polymer thermo-optic switch with silica under-cladding

Fast Response 2×2 Thermo-Optic Switch with Polymer/silica Hybrid Waveguide

Fabrication of A Polymer-On-Silica Hybrid Thermo-Optic Switch with Fast Response Time and Low Power Consumption

Response-time improvement of a 2×2 thermo-optic switch with polymer/silica hybrid waveguide

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

A Multimode Interference Polymer-Silica Hybrid Waveguide 2x2 Thermo-Optic Switch

Optimized Design and Fabrication of Polymer/Silica Thermo-Optic Switch with Low Power Consumption

Polymer Thermo-Optic Switches with Y-Branch

Improved Performance of Thermal-Optic Switch Using Polymer/Silica Hybrid and Air Trench Waveguide Structures

Design and Fabrication of an Organic/inorganic Hybrid Thermo-Optic Switch with Low Power Consumption

Polymeric Thermo-Optic Switch Based on Strip-Loaded Optical Waveguide

Study of Hybrid SiO_2/polymer Y Branch Waveguide Thermo-Optic Switches

Driving-NoiseTolerant Broadband Polymer/Silica Hybrid Thermo-Optic Switch with Low Power Consumption (vol 31, pg 299, 2012)

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

Low Power 1×4 Polymer/sio2 Hybrid Waveguide Thermo-Optic Switch

650-Nm 1 × 2 Polymeric Thermo-Optic Switch with Low Power Consumption.

Design and Performance Analysis of Silica-Based Thermo-Optical Switches Operating in O-Band and C-Band

Polymer/silica Hybrid 3D Waveguide Thermo-Optic Mode Switch Based on Cascaded Asymmetric Directional Couplers

Fast Thermo-Optical Modulators with Doped-Silicon Heaters Operating at 2 Μm.

Low Power Consumption Thermo-Optic Switch Formed by an Integrated Processing Method.

Fabrication and Driving-Noise-tolerance Characteristics of Wide-Spectrum Polymer Thermo-Optic Switch