Abstract:By adopting polymer/silica hybrid rib waveguide structure,a low power-consumption Mach-Zehnder interferometer(MZI) thermo-optic switch is designed and fabricated with techniques including chemical vapor deposition(CVD),spin-coating,wet-etching,etc.The wavelength dispersions of waveguide core,buffer and cladding materials are measured,and output power and output spectrum are theoretically analyzed.Switching response and spectrum characteristics are measured using a tunable laser as input source.Under 1 550 nm wavelength,the driving power of the switch is about 7.8 mW,the extinction ratio between ON state and OFF state is up to 32.6 dB,and under the function of pure square-wave switching signal(peak-to-peak amplitude of 3Vpp),the rising time and falling time are 107 μs and 71 μs,respectively.Keeping applying the driving power at 1 550 nm wavelength on the device,the measured spectrum width is about 50 nm(1 520-1 570 nm) with an extinction ratio over 18 dB.A noise-level-tunable driving source is developed with NE555 and other integrated circuits,and then the driving-noise-tolerance characteristics are investigated.Experimental results indicate that the allowed maximum noise-level is about 1.1 Vpp with a required extinction ratio larger than 10 dB.The proposed results in this paper are of good meanings for practical applications of such thermo-optic switches with the hybrid waveguide structure.

Response-time improvement of a 2×2 thermo-optic switch with polymer/silica hybrid waveguide

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

A Multimode Interference Polymer-Silica Hybrid Waveguide 2x2 Thermo-Optic Switch

Polymer Thermo-Optic Switches with Y-Branch

Design and Fabrication of an Organic/inorganic Hybrid Thermo-Optic Switch with Low Power Consumption

Fast Thermo-Optical Modulators with Doped-Silicon Heaters Operating at 2 Μm.

Optimized Design and Fabrication of Polymer/Silica Thermo-Optic Switch with Low Power Consumption

High efficiency thermal optical switch based on suspended polymer waveguide

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

The Design of a 2×2 Polymer TIR Switch Based on Thermal Field Analysis Employing Thermo-Optic Effect

Fabrication and Driving-Noise-tolerance Characteristics of Wide-Spectrum Polymer Thermo-Optic Switch

Compact Su8-Silica Hybrid Thermo-Optic Switch With Low Power Consumption

2 × 3 Thermo-optical Switch Utilizing Total Internal Reflection

Design and Performance Analysis of Silica-Based Thermo-Optical Switches Operating in O-Band and C-Band

Low Power Consumption Thermo‐optic Switch Based on DR1/PMMA

Compact 1 X N Thermo-Optic Switches Based on Silicon Photonic Wire Waveguides.

Low Crosstalk Y-branch 1×2 Thermo-Optic Digital Optical Switch

A 1 × 4 Polymeric Digital Optical Switch Based on the Thermo-Optic Effect

Study of 1×2 total-internal-reflection thermo-optic polymeric switches

Study of polymeric optical switches based on multimode interference coupler

Low Crosstalk 1/spl Times/2 Thermooptic Digital Optical Switch with Integrated S-bend Attenuator