Abstract:Flexible and wearable optoelectronic devices are the new trend for an active lifestyle. These devices are polymer-based for flexibility. We demonstrated flexible polymer waveguide optical switches for a flexible photonic integrated circuit. The optical switches are composed of a single-mode inverted waveguide with dimensions of 5 mu m waveguide width, 3 mu m ridge height, and 3 mu m slab height. A Mach-Zehnder structure was used in the device, with the Y-branch horizontal length of 0.1 cm, the distance between two heating branches of 30 mu m, and the heating branch length of 1 cm. The optical field of the device was simulated by beam propagation to optimize the electrode position. The switching properties of the flexible optical switch with different working conditions, such as contact to the polymer, silicon, and skin, were simulated. The device was prepared based on the photo curved polymer and lithography method. The end faces of the flexible film device were processed using an excimer laser with optimized parameters of 28 mJ/cm(2) and 15 Hz. The response rise time and fall time on the PMMA substrate were measured as 1.98 ms and 2.71 ms, respectively. The power consumption was 16 mW and the extinction ratio was 11 dB. The response rise and fall times on the Si substrate were measured as 1.08 ms and 1.62 ms, respectively. The power consumption was 17 mW and the extinction ratio was 11 dB. The demonstrated properties indicate that this flexible optical waveguide structure can be used in the light control area of a wearable device. (C) 2017 Optical Society of America

Three-Dimensional Polymer Thermo-Optic Switch at 650 Nm

2 × 3 Thermo-optical Switch Utilizing Total Internal Reflection

650-Nm 1 × 2 Polymeric Thermo-Optic Switch with Low Power Consumption.

A Novel 2 X 3 Optical Switch Utilizing Total Internal Reflection Based On Thermo-Optical Effect Of Polymer

850-Nm Polymeric Waveguide Thermo-Optic Switch with Low Power-Consumption

Polymer Thermo-Optic Switches with Y-Branch

A 1 × 4 Polymeric Digital Optical Switch Based on the Thermo-Optic Effect

Polymer M-Z Thermal Optical Switch at 532-Nm Based on Wet Etching and UV-Writing Waveguide.

Polymer Thermal Optical Switch for a Flexible Photonic Circuit

Study of 1×2 total-internal-reflection thermo-optic polymeric switches

Low Power Consumption Thermo‐optic Switch Based on DR1/PMMA

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

Polymeric Thermo-Optic Switch Based on Strip-Loaded Optical Waveguide

Optimized Design and Fabrication of Polymer/Silica Thermo-Optic Switch with Low Power Consumption

Polyimide-waveguide-based Thermal Optical Switch Using Total-Internal-reflection Effect

Fabrication and Driving-Noise-tolerance Characteristics of Wide-Spectrum Polymer Thermo-Optic Switch

Polymeric Thermo-Optic Digital Optical Switches

A vertically coupled polymer optical waveguide switch

On-chip Integrated Optical Switch Based on Polymer Waveguides

Thermooptic Switch Based on Photonic-Crystal Line-Defect Waveguides

650-nm All-Polymer Thermo-Optic Waveguide Switch Arrays Based on Novel Organic–Inorganic Grafting PMMA Materials