Abstract:The work is devoted to the ultrasonic method for controlling mechanical stresses using ultrasonic head waves. The speed of the head ultrasonic wave is the highest, which allows it to be recorded stably among other types of ultrasonic waves and noises. To determine mechanical stresses, registration of the relative change in the velocity of propagation of the head ultrasonic wave is used, corrected for the change in the measured value caused by the change in the temperature of the test object. Thus, mechanical stresses are not measured directly, but the sources of uncertainty are the results of measurements of the propagation velocity of the head ultrasonic wave, the temperature of the environment and the test object, the coefficients of acoustoelastic and thermoacoustic coupling, and the parameters of the optical-acoustic transducer. The contribution of each of these factors to the results of measurements of mechanical stresses is estimated. On the basis of GOST 34100.3–2017, a method has been developed for asessing the uncertainty of measurements of mechanical stresses by the ultrasonic method using head waves. The dependence of the expanded measurement uncertainty on the value of the measured mechanical stresses was obtained. This dependence shows that measurements of mechanical stresses in the range of less than 100 MPa have an uncertainty of more than 10 % of the measured value. When measuring mechanical stresses over 200 MPa, the measurement uncertainty will not exceed 4 % (at a confidence level of 95 %).The proposed approach to assessing the uncertainty of measurements of mechanical stresses can be useful in the development of requirements for the used measuring instruments, alignment samples and control objects, as well as in the development of methods for monitoring mechanical stresses by the ultrasonic method using an optical-acoustic separate-combined transducer.

Evaluation of Measurement Uncertainty for Ultrasonic Contact ImpedanceHardness Testing Results

A Rapid Field Measurement Method for the Determination of Joint Roughness Coefficient of Large Rock Joint Surfaces

Method for Measurement Uncertainty Evaluation of Cylindricity Error Based on Good Point Set

Poor Information Material Brinell Hardness Measurement Uncertainty Evaluation Based on Monte Carlo Method

Uncertainty Estimation in Measurement of Micromechanical Properties Using Random-Fuzzy Variables

Recent Study on the Related Problems in Evaluation of Mechanical Properties for Mems Materials

Uncertainty in the Temperature Measurement System Using Thermocouples

Analysis of measurement uncertainty of a surface acoustic wave micro-pressure sensor

Uncertainty Evaluation of Straightness in Coordinate Measuring Machines Based on Error Ellipse Theory Integrated with Monte Carlo Method

High-Throughput Measurement of the Contact Resistance of Metal Electrode Materials and Uncertainty Estimation

Precision Measuring Technique for Contact Resistance of Contact Materials

Connection force measurement of precision small interference components using ultrasound

METHODOLOGY FOR EVALUATION THE UNCERTAINTY OF MEASUREMENT OF MECHANICAL STRESS BY THE ULTRASONIC METHOD WITH THE HELP OF AN OPTICAL-ACOUSTIC SEPARATE-COMBINED TRANSDUCER

Ultrasonic Hardness Tester and Its Evolution

Identification of the Velocity, Thickness, and Interfacial Roughness of Coating Using Full Time-Domain URCPS: Cross-Correlation-Based Inverse Problem

Ultrasonic measurement of contact stress at metal-to-metal interface based on a real rough profile through modeling and experiment

Experimental Investigation and Numerical Simulation on the Role of Sphere Indenter in Measuring Contact Resistance of Flat Rivets.

Uncertainty Evaluation of the Waveform Parameters of 1-Kv Low-Impedance Impulse Voltage Calibrator.

Measurement insights and error analysis of electronic parameters for ultrasonic transducers

Mechanics analysis and simulation of material Brinell hardness measurement

Study on the calibration methods of machine compliance for depth-sensing indentation instrument