Abstract:It is necessary to control temperature using thermoelectric sensors for steel products surface alloying in conditions of microarc heating. The using S -type thermocouples possibility has been substantiated, main factors affecting the measurement results have been established, and the the reproducibility index functional dependence on the measured temperature has been determined, as a result of previous studies. However, additional influencing factors that may affect to the heating process kinetics and the temperature measurements results were not taken into account. The purpose of the work was a steel temperature measurement results uncertainty generalized assessment during microarc heating, taking into account most complete influencing factors set. Influencing factors comprise: average coal powder particle size ( X 1), sample diameter ( X 2); chromium content in steel ( X 3 ). The measurement error was denoted Y . The dependence is obtained: Y = –4.032 X 1 – 0.095 X 2 + 0.0058 X 3 + 3.414. Thus, in the studied range of values, an increase in the powder particle and the samples diameter size leads to a decrease in the measurement error, and the chromium content increase leads to its increase. Therefore, the temperature measurement error during microarc heating can be reduced with decrease the sample heating rate, as well as with increase the heat transfer intensity from its surface to the material depth due to an increase the size, and, accordingly, the processed products mass. Next, the studied factors values distribution laws were evaluated. For X 1 and X 2, the normal distribution law is adopted, for X 3 – uniform. Taking into account each factor's influence coefficients, and the total uncertainty estimate introduced assessment by them, a generalized uncertainty estimate was found: U = 1.1 °C. The microarc heating temperature measurement method quantitative assessment detailed of the accuracy makes it possible to take into account all significant influencing factors and their total measurement uncertainty contribution. The obtained temperature measurement's total uncertainty value from the three studied factors can be used as a priori information as a type B uncertainty during the microarc saturation process.

Uncertainty in the Temperature Measurement System Using Thermocouples

Development of High Accuracy PVT Measurement System for Refrigerants

New method for compensating uncertainty of control plant

Analysis of Multi-Factor on Measurement Improvement of an Infrared Imager in Low-Temperature Environments

Error Analysis and Evaluation of Uncertainty in the K-type Thermocouple Test

UNCERTAINTY QUANTIFICATION USING THERMOCOUPLE AND ARDUINO® COMPATIBLE HARDWARE

Temperature Measuring Method Accuracy Evaluation in the Microarc Heating Process Based on Reproducibility and Uncertainty Indicators

A study on mutative scale straightness measurement based on uncertainty analysis

Measurement uncertainty evaluation of optical interferometric methane detector

Uncertainty assessment of thermal performance testing devices of fan coil

The Uncertainty Evaluation of NTC Thermistor Calibration Equation

Uncertainty Analysis in Measurement for Led Junction Temperature and Thermal Resistance

Study on Optimal Layout of Temperature Measurement for Thermal Errors of Spindle in Machine Tools

Uncertainty Evaluation for Wind Speed Measurement Part (2): "Input quantity correlation"

Measurement uncertainties of multi-band pyrometry

Sensitivity and Uncertainty Analysis of Nonideal Calibration Standards for 16-Term Error Model

Analysis on Uncertainty Assessment Case of Radiator Thermal Performance Test

An Accurate Surface Tension Measuring System and the Analysis of Measurement Uncertainty

Uncertainty Analysis of Spectral Emissivity Measurement Method

Several Hotspots on Researches and Applications of Uncertainty Theory

Drifted Uncertainty Evaluation of a Compact Machine Tool Spindle Error Measurement System