Abstract:Acoustical methods are playing an important role for nondestructive evaluation (NDE) of adhesive-bonded composites and components in industrial applications. A dual-frequency ultrasonic technique is proposed for the quantitative evaluation of contact strength between pressed solid surfaces. An ultrasonic excitation consists of two primary frequency components is applied perpendicular to the interface, and the transmitted wave is examined. Theoretical study is based on a perturbation analysis of contact acoustic nonlinearity (CAN) model, predicting the generation of difference and sum frequency waves, together with the second harmonics. Nonlinear parameters are defined to describe the nonlinearity generation efficiencies. Experiments are performed for three types of interfaces, i. e. the interfaces of two aluminum alloy blocks with and without couplant and two glass blocks. The difference frequency wave component has bigger generation efficiency than other nonlinear components, which offers an advantage of high SNR and good detection capability of contact stiffness (interfacial stiffness). For each interface, the first and second-order interfacial stiffness are measured with contact pressure increasing from near zero to about 0.8 MPa with the aid of a laser interferometer. Finally, numerical simulations are also carried out, and a consistency is found between measurements and calculations. The dual-frequency ultrasound sent to the interface generates at least four second-order nonlinear components, which enriches the CAN technique for interface quality examinations. Both measured and simulated results indicate an increase of interfacial stiffness and decrease of nonlinear parameters with growing contact pressure. Moreover, measured results show that couplant between interfaces influences the contact stiffness evaluations in an enhanced manner, while the contact pressure determined by measured interfacial stiffness values are underestimated due to the couplant. The main problem comes from the contact between the transducersample interfaces, which brings extra nonlinearity to the detected signals and affect the accuracy of measuring. Copyright© (2010) by the International Congress on Acoustics.

Quantitative Evaluation of Contact Stiffness Between Pressed Solid Surfaces Using Dual-Frequency Ultrasound

Evaluation of contact stiffness between solid-solid interfaces using dual-frequency ultrasound

Numerical and Experimental Evaluation of Ultrasonic Wave Propagation Characteristics at Contact Interface

Acoustoelastic determination of local surface stresses in polymethylmethacrylate

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Theoretical and experimental study on interface stiffness measurement of rough surface using improved acoustic model

Numerical Simulation of the Ultrasonic Pulse Wave Propagation at Solid-Solid Interface

Nonlinear interaction between ultrasound and solid rough interface

A novel ultrasonic solid coupling inspection model based on interface total load capacity

Ultrasonic measurement of contact stress at metal-to-metal interface based on a real rough profile through modeling and experiment

Measurement of coating–substrate interface stiffness using a constructed ultrasonic echo phase derivative spectrum

Design and experimental verification of phase-reversal Fresnel lens for contact stress characterization

A novel acoustic model for interface stiffness measurement of dry tribological interface considering geometric dispersion effect and boundary effect

Evaluation of interface wave velocity, reflection coefficients and interfacial stiffnesses of contacting surfaces

In situ evaluation of contact stiffness in a slip interface with different roughness conditions using ultrasound reflectometry

Experimental studies on the interfacial separation and stiffness of rough elastic-plastic solids

Connection force measurement of precision small interference components using ultrasound

Non-destructive evaluation of non-uniform stress fields and subsurface stress gradients using ultrasonic waves

Off-epicentral measurement of laser-ultrasonic shear-wave velocity and its application to elastic-moduli evaluation

Theoretic Analysis And Numerical Simulation On Quantitative Evaluation Of Interface Strength By Pulsed Laser Technology

Non-destructive testing of interfacial stiffness based on spring model for diffusion bonding interface of titanium alloy components with complex surface