Abstract:Acoustical methods are playing an important role for nondestructive evaluation (NDE) of adhesive-bonded composites and components in industrial applications. A dual-frequency ultrasonic technique is proposed for the quantitative evaluation of contact strength between pressed solid surfaces. An ultrasonic excitation consists of two primary frequency components is applied perpendicular to the interface, and the transmitted wave is examined. Theoretical study is based on a perturbation analysis of contact acoustic nonlinearity (CAN) model, predicting the generation of difference and sum frequency waves, together with the second harmonics. Nonlinear parameters are defined to describe the nonlinearity generation efficiencies. Experiments are performed for three types of interfaces, i. e. the interfaces of two aluminum alloy blocks with and without couplant and two glass blocks. The difference frequency wave component has bigger generation efficiency than other nonlinear components, which offers an advantage of high SNR and good detection capability of contact stiffness (interfacial stiffness). For each interface, the first and second-order interfacial stiffness are measured with contact pressure increasing from near zero to about 0.8 MPa with the aid of a laser interferometer. Finally, numerical simulations are also carried out, and a consistency is found between measurements and calculations. The dual-frequency ultrasound sent to the interface generates at least four second-order nonlinear components, which enriches the CAN technique for interface quality examinations. Both measured and simulated results indicate an increase of interfacial stiffness and decrease of nonlinear parameters with growing contact pressure. Moreover, measured results show that couplant between interfaces influences the contact stiffness evaluations in an enhanced manner, while the contact pressure determined by measured interfacial stiffness values are underestimated due to the couplant. The main problem comes from the contact between the transducersample interfaces, which brings extra nonlinearity to the detected signals and affect the accuracy of measuring. Copyright© (2010) by the International Congress on Acoustics.

Numerical Simulation of the Ultrasonic Pulse Wave Propagation at Solid-Solid Interface

Auto-tuning Numerical Method for Acoustic Wave Simulation Using Analytical Solution

Finite element analysis on ultrasonic propagation of interface bonding of bimetal composites

A CIP-based Numerical Simulation of Freak Wave Impact on a Floating Body

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Numerical Simulation of Surface Acoustic Wave and Detection of Surface Crack in Steel

Finite element based research on ultrasonic spectral characteristic of inner wall defect of metal materials

Obliquely incident ultrasonic wave propagation in a fluid-solid configuration and solid velocity measurements

Numerical and Experimental Evaluation of Ultrasonic Wave Propagation Characteristics at Contact Interface

A novel ultrasonic solid coupling inspection model based on interface total load capacity

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Quantitative Evaluation of Contact Stiffness Between Pressed Solid Surfaces Using Dual-Frequency Ultrasound

Numerical Simulations of Shock/obstacle Interactions Using an Improved Ghost-Cell Immersed Boundary Method

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Evaluation of contact stiffness between solid-solid interfaces using dual-frequency ultrasound

Nonlinear interaction between ultrasound and solid rough interface

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

Finite-Element Simulation Of Contact-Impact Dynamics For High-Power Ultrasonic Processing System

Simulations Of Bulk Ultrasonic Waveform Excited By Pulsed Laser For Two-Layer Medium Using Finite Element Method