Abstract:Ultrasonic wedge bonding of aluminum (Al) wires is a widely applied interconnect technology for power elec-tronic packaging. The joint quality of the wedge bonding is mainly affected by the process parameters and material properties. Inappropriate process parameters will lead to failure modes such as chip surface pit, metal layer peeling off, wire cracking, non-sticking to the pad, etc., which limits the long-term stability of power devices. In order to reach the desired reliability, the design of experiment (DoE) is generally deployed which is costly in terms of time and related materials. Therefore, simulation-assisted analysis is in demand to rapidly narrow down the process windows. In this paper, an ultrasonic bonding model involving thick Al wires (300 mu m) was established based on the Finite Element Method (FEM), to optimize process parameters effectively with reduced time and cost. The model was designed in ANSYS utilizing the transient structural mechanics module with various stresses and ultrasonic power, to simulate the relative deformation of the bonded wires and the displacement against the substrate. The result was then verified by ultrasonic wedge bonding samples with 9 sets of process parameters. The stress distributions were simulated and analyzed with the failure modes of tensile strength tests, while the deformation of wires under various process parameters was measured and compared with shear strength tests. Further, the relationship between the failure modes of the joint and the deformation was then analyzed by Response Surface Method (RSM), and the regression equation of the wire deformation and related process parameters was established and fitted with the actual sample's data. Such analysis not only found the optimum range of the deformation of thick Al ultrasonic wire bonds but also quickly provided a range of optimized processes for Al thick wires applying ultrasonic wedge bonding techniques.

Finite element analysis on ultrasonic propagation of interface bonding of bimetal composites

Finite element based research on ultrasonic spectral characteristic of inner wall defect of metal materials

Al-clad Cu Bond Wires for Power Electronics Packaging: Microstructure Evolution, Mechanical Performance, and Molecular Dynamics Simulation of Diffusion Behaviors

Numerical Simulation of the Ultrasonic Pulse Wave Propagation at Solid-Solid Interface

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Finite element modeling and analysis of ultrasonic bonding process of thick aluminum wires for power electronic packaging

Finite element simulation and experimental verification of ultrasonic non-destructive inspection of defects in additively manufactured materials

Microstructure Modeling and Ultrasonic Wave Propagation Simulation of A206–Al2O3 Metal Matrix Nanocomposites for Quality Inspection

Non-destructive testing of interfacial stiffness based on spring model for diffusion bonding interface of titanium alloy components with complex surface

Ultrasonic-assisted liquid–solid composite method to fabricate bimetallic aluminum alloy

Ultrasonic non-destructive evaluation study of molecular diffusion bonding of thin copper-aluminum electrode sheets

Interface evolution and strengthening of two-step roll bonded cu/Al clad composites

Investigation of Interfacial Layer for Ultrasonic Spot Welded Aluminum to Copper Joints.

Effect of interface-layer process parameters on forming quality of 316L/CuSn10 bimetals fabricated via laser powder bed fusion

An SEM-Based Finite Element Analysis of Cu-Ag Sintered Joints on Thermal Shock Reliability

Experiment and computation: A combined approach to characterize the constitutive and fracture behaviors of metallurgical bonding interface in bimetallic composites

Non-contact detection of the interfacial microdefects in metal/CFRP hybrid composites using air-coupled laser ultrasound

Numerical Analysis and Theoretical Study on the Interfacial Bonding Behavior of High-Strength Steel Stainless Wire Mesh-Reinforced ECC and Concrete

Interfacial bonding mechanism of Cu/Al composite plate produced by corrugated cold roll bonding