Abstract:Aluminum-aluminum bimetal were prepared by casting liquid A356 aluminum alloy onto 6101 aluminum extrusion bars and solidifying under applied pressure. The effect of surface treatment, pouring temperature and applied pressure on microstructure and mechanical properties of the bimetal was investigated. The results showed that sound metallic bonding could be produced by electro-plating the solid 6101 aluminum alloy with a layer of zinc coating and carefully controlling the casting temperature. With the application of pressure during solidification process, the tensile strength exhibited more promising results than that made by gravity casting, for both A356 aluminum alloy matrix and bimetal. However, with the increase of applied pressure, A356 aluminum alloy matrix and bimetal showed different behaviors. For A356 aluminum alloy matrix, the tensile strength increased with the increase of applied pressure, for bimetal it appeared to be independent on the magnitude of the applied pressure and the value remained steady. The fracture analysis indicated that during the tensile test of bimetal, the crack initiation began with initial fracture of eutectic Si in the transition zone then extended in the transition zone. The tensile strength of the bimetal fabricated by squeeze casting method was improved by about 10%, from 145 MPa to 155 MPa, as compared with that made by gravity casting. The process presented in this study provides a promising and effective approach to create a metallic bonding between an aluminum insert and various aluminum melts to develop advanced functional and structural materials. (C) 2014 Elsevier Ltd. All rights reserved.

Ultrasonic-assisted liquid–solid composite method to fabricate bimetallic aluminum alloy

Interface Structure of Ultrasonic Vibration Aided Interaction Between Zn–Al Alloy and Al2O3p/6061Al Composite

Interfacial Structure and Formation Mechanism in Ultrasonically Aided Liquid Bonding of Al18B4O33/Al Composites in Air

Interface Structure and Strength of Ultrasonic Vibration Liquid Phase Bonded Joints of Al2O3p/6061Al Composites

Application of a New Ultrasonic-Assisted Semi-Solid Brazing on Dissimilar Al/Mg Alloys

Interaction Behaviors at the Interface Between Liquid Al–Si and Solid Ti–6Al–4V in Ultrasonic-Assisted Brazing in Air

Interaction behaviors between Zn-Al alloy and Al(2)O(3)p/6061Al composite with aid of ultrasonic vibration

Ultrasonic assisted fabrication of particle reinforced bonds joining aluminum metal matrix composites

Finite element analysis on ultrasonic propagation of interface bonding of bimetal composites

Mechanism of ultrasonic-assisted transient liquid phase bonding of 6061 Al alloy with cladded Zn-Al alloy in air

Interfacial reaction of intermetallic compounds of ultrasonic-assisted brazed joints between dissimilar alloys of Ti-6Al-4V and Al-4Cu-1Mg

Interaction behaviors between Zn-AI alloy and Al2O 3p/6061Al composite with aid of ultrasonic vibration

A Novel Diffusion Bonding of 6063al Based on a Mode of Diffusion-Migrating and Suspension-Broken of Surface Oxide Film

Behaviors of Oxide Film at the Ultrasonic Aided Interaction Interface of Zn–Al Alloy and Al2O3p/6061Al Composites in Air

An Investigation into Aluminum–aluminum Bimetal Fabrication by Squeeze Casting

Microstructure and Mechanical Properties of Ti–6Al–4V/Al1060 Joints by Ultrasonic-Assisted Brazing in Air

Microstructure and Strength of Ultrasonic-Assisted Brazed Joints of Si3N4/6061Al Composites

Wetting and Oxidation During Ultrasonic Soldering of an Alumina Reinforced Aluminum–copper–magnesium (2024 Al) Matrix Composite

Rapid Ultrasound-Induced Transient-Liquid-phase Bonding of Al-50Si Alloys with Zn Interlayer in Air for Electrical Packaging Application

Ultrasonic-Assisted Semi-Solid Forming Method and Microstructure Evolution of Aluminum/Copper Brazed Joints

Longitudinal Ultrasonic Vibration Assisted Rapid Solid Phase Bonding of 2024 Aluminum Alloy Using Ag as Interlayer for Structure Lightweight Design