Abstract:Acoustical methods are playing an important role for nondestructive evaluation (NDE) of adhesive-bonded composites and components in industrial applications. A dual-frequency ultrasonic technique is proposed for the quantitative evaluation of contact strength between pressed solid surfaces. An ultrasonic excitation consists of two primary frequency components is applied perpendicular to the interface, and the transmitted wave is examined. Theoretical study is based on a perturbation analysis of contact acoustic nonlinearity (CAN) model, predicting the generation of difference and sum frequency waves, together with the second harmonics. Nonlinear parameters are defined to describe the nonlinearity generation efficiencies. Experiments are performed for three types of interfaces, i. e. the interfaces of two aluminum alloy blocks with and without couplant and two glass blocks. The difference frequency wave component has bigger generation efficiency than other nonlinear components, which offers an advantage of high SNR and good detection capability of contact stiffness (interfacial stiffness). For each interface, the first and second-order interfacial stiffness are measured with contact pressure increasing from near zero to about 0.8 MPa with the aid of a laser interferometer. Finally, numerical simulations are also carried out, and a consistency is found between measurements and calculations. The dual-frequency ultrasound sent to the interface generates at least four second-order nonlinear components, which enriches the CAN technique for interface quality examinations. Both measured and simulated results indicate an increase of interfacial stiffness and decrease of nonlinear parameters with growing contact pressure. Moreover, measured results show that couplant between interfaces influences the contact stiffness evaluations in an enhanced manner, while the contact pressure determined by measured interfacial stiffness values are underestimated due to the couplant. The main problem comes from the contact between the transducersample interfaces, which brings extra nonlinearity to the detected signals and affect the accuracy of measuring. Copyright© (2010) by the International Congress on Acoustics.

Finite-Element Simulation Of Contact-Impact Dynamics For High-Power Ultrasonic Processing System

Finite Element Analysis of Superharmonic and Subharmonic Vibrations of Plates Excited by Intensive Ultrasonic Pulses

FEM Modeling of Vibro-Impact Response of Metal Plates Excited by a High-Power Ultrasonic Transducer

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

The Design And Finite Element Analyses Of The Super-Long Ultrasonic Amplitude Transformer

Numerical Simulation of the Ultrasonic Pulse Wave Propagation at Solid-Solid Interface

Simulations Of Ultrasonic Waveform Excited By Pulsed Laser By Using Finite Element Method

Finite Element Simulation of the Frictional Heating of Cracks under Excitation of Intensive Ultrasonic Waves

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

Finite element analysis on ultrasonic propagation of interface bonding of bimetal composites

Simulation and Optimization of Wedge-Shaped Ultrasonic Transducers Using Finite Element Method (Fem)

Nonlinear vibrations and heating phenomena of cracks in metal plates excited by intensive ultrasonic pulses.

Design and Analysis of Ultrasonic Composite Transducer with a Quarter-wave Taper Transition Horn

A continuous contact force model for the impact analysis of hard and soft materials

Feasible Optimization and Fabrication of Multi-dimension Composites for High Frequency Ultrasonic Transducer

Estimation of the Dynamic Focused Ultrasound Radiation Force Generated by an Ultrasonic Transducer

Evaluation of contact stiffness between solid-solid interfaces using dual-frequency ultrasound

Investigation of a cascaded piezoelectric transducer with cone horn for multi-mode power ultrasound application

Contact Model Analysis of Hybrid Ultrasonic Motor

Simulation Of Three Constitutive Behaviors Based On Nonlinear Ultrasound

Numerical Modelling of Unilateral Point-Focusing Electromagnetic Acoustic Transducer with Experimental Validation