Abstract:Acoustical methods are playing an important role for nondestructive evaluation (NDE) of adhesive-bonded composites and components in industrial applications. A dual-frequency ultrasonic technique is proposed for the quantitative evaluation of contact strength between pressed solid surfaces. An ultrasonic excitation consists of two primary frequency components is applied perpendicular to the interface, and the transmitted wave is examined. Theoretical study is based on a perturbation analysis of contact acoustic nonlinearity (CAN) model, predicting the generation of difference and sum frequency waves, together with the second harmonics. Nonlinear parameters are defined to describe the nonlinearity generation efficiencies. Experiments are performed for three types of interfaces, i. e. the interfaces of two aluminum alloy blocks with and without couplant and two glass blocks. The difference frequency wave component has bigger generation efficiency than other nonlinear components, which offers an advantage of high SNR and good detection capability of contact stiffness (interfacial stiffness). For each interface, the first and second-order interfacial stiffness are measured with contact pressure increasing from near zero to about 0.8 MPa with the aid of a laser interferometer. Finally, numerical simulations are also carried out, and a consistency is found between measurements and calculations. The dual-frequency ultrasound sent to the interface generates at least four second-order nonlinear components, which enriches the CAN technique for interface quality examinations. Both measured and simulated results indicate an increase of interfacial stiffness and decrease of nonlinear parameters with growing contact pressure. Moreover, measured results show that couplant between interfaces influences the contact stiffness evaluations in an enhanced manner, while the contact pressure determined by measured interfacial stiffness values are underestimated due to the couplant. The main problem comes from the contact between the transducersample interfaces, which brings extra nonlinearity to the detected signals and affect the accuracy of measuring. Copyright© (2010) by the International Congress on Acoustics.

Estimation of the Dynamic Focused Ultrasound Radiation Force Generated by an Ultrasonic Transducer

Modeling and estimation of focused ultrasound radiation force for modal excitation

The Relationship of Cavitation to the Negative Acoustic Pressure Amplitude in Ultrasonic Therapy

A Rod-Like Acoustic Radiation Force in Ultrasound-Based Elastography: A Simulation Study

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Acoustic Characterization Of High Intensity Focused Ultrasound Fields Generated From A Transmitter With A Large Aperture

Mode-selective noncontact excitation of microcantilevers and microcantilever arrays in air using the ultrasound radiation force

Accurate Acoustic Power Measurement for Low-Intensity Focused Ultrasound Using Focal Axial Vibration Velocity

Acoustic Characterization of High Intensity Focused Ultrasound Field Generated from a Transmitter with Large Aperture

Numerical Modelling of Unilateral Point-Focusing Electromagnetic Acoustic Transducer with Experimental Validation

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Finite element modelling strategy for determining directivity of thermoelastically generated laser ultrasound

Multi-mode Ultrasonic Waves Focusing in a Variable Focus Technique for Simultaneous Sound-Velocity and Thickness Measurement

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

Quasi-plane Shear Wave Propagation Induced by Acoustic Radiation Force with a Focal Line Region: a Simulation Study

Hydrodynamic Force Characterization and Experiments of Underwater Piezoelectric Flexible Structure

Measurement of High Intensity Focused Ultrasound Fields Using a Combined Measurement and SBE Modeling Approach

Nonlinear Acoustic-Power Measurement Based on Fundamental Focal Axial Vibration Velocity for High-Intensity Focused Ultrasound

Finite-Element Simulation Of Contact-Impact Dynamics For High-Power Ultrasonic Processing System

Novel Bulk Acoustic Wave Hammer to Determinate the Dynamic Response of Microstructures Using Pulsed Broad Bandwidth Ultrasonic Transducers

Evaluation of contact stiffness between solid-solid interfaces using dual-frequency ultrasound