Abstract:At present, researchers in the field of pipeline inspection focus on pipe wall defects while neglecting pipeline defects in special situations such as welds. This poses a threat to the safe operation of projects. In this paper, a multi-node fusion and modal projection algorithm of steel pipes based on guided wave technology is proposed. Through an ANSYS numerical simulation, research is conducted to achieve the identification, localization, and quantification of axial cracks on the surface of straight pipelines and internal cracks in circumferential welds. The propagation characteristics and vibration law of ultrasonic guided waves are theoretically solved by the semi-analytical finite element method in the pipeline. The model section is discretized in one-dimensional polar coordinates to obtain the dispersion curve of the steel pipe. The T(0,1) mode, which is modulated by the Hanning window, is selected to simulate the axial crack of the pipeline and the L(0,2) mode to simulate the crack in the weld, and the correctness of the dispersion curve is verified. The results show that the T(0,1) and L(0,2) modes are successfully excited, and they are sensitive to axial and circumferential cracks. The time–frequency diagram of wavelet transform and the time domain diagram of the crack signal of Hilbert transform are used to identify the echo signal. The first wave packet peak point and group velocity are used to locate the crack. The pure signal of the crack is extracted from the simulation data, and the variation law between the reflection coefficient and the circumferential and radial dimensions of the defect is calculated to evaluate the size of the defect. This provides a new and feasible method for steel pipe defect detection.

Numerical Simulation of Surface Acoustic Wave and Detection of Surface Crack in Steel

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

Surface Crack Identification on a Cylinder Using the Signal Enhancement of the Scanning Laser Line Source Method

Detecting features of defect metal based on laser ultrasonic technique

Laser-generated Surface Waves for Quantitative Detection of Inclined Surface Cracks Based on Finite Element Analysis

Finite Element Analysis of Laser-Generated Rayleigh Wave for Sizing Subsurface Crack in Frequency Domain

Numerical Study of Length and Angle Gauging for Subsurface-Inclined Cracks Based on Reflected Surface Waves with Laser Ultrasonic Technique

Numerical Simulation of Angled Surface Crack Detection Based on Laser Ultrasound

Numerical Simulation of the Interaction of Laser-Generated Rayleigh Waves with Subsurface Cracks

Quantitative Detection of Lateral Subsurface Cracks Based on Laser-Generated Rayleigh Waves in the Frequency Domain

Location Detection and Numerical Simulation of Guided Wave Defects in Steel Pipes

Numerical Simulation of Metal Defect Detection Based on Laser Ultrasound

Array Waveguide Probe Loaded with Split-Ring Resonators for Sizing the Cracks in Metal Surface

Numerical Simulation Of Nonlinear Lamb Waves Used In A Thin Plate For Detecting Buried Micro-Cracks

Evaluation of fatigue damage of structural steel based on attenuation of laser-induced surface acoustic wave

Scattering of the Fundamental Shear Guided Wave From a Surface-Breaking Crack in Plate-Like Structures

FEM Simulation of Nonlinear Lamb Waves for Detecting a Micro-Crack in a Metallic Plate

A method for crack sizing using Laser Doppler Vibrometer measurements of Surface Acoustic Waves

Quantitative Detection Method for Surface Angled Cracks Based on Laser Ultrasonic Full-Field Scanning Data

Experimental and Numerical Study on Characterization and Evaluation of Surface Cracks with Wireless Ultrasonic Sensor

Modeling and Analysis of Surface Wave EMAT and Its Acoustic Field