Abstract:Nondestructive testing of subsurface defects plays an important role in ensuring the performance and safety of a component or a structure.However,the subsurface defects are often deeply buried and invisible,and therefore,are difficult to be identified.Laser ultrasonic technology (LUT),which is further developed from the traditional piezoelectric ultrasonic technology,has a series of advantages,such as non-contact,broadband,high sensitivity and high spatial resolution.And LUT has been used in detecting surface defects for a long time.The interaction of laser excited surface acoustic wave (LESAW) with surface defects is well understood,but its interaction with subsurface defects is still unclear,even though these two groups of defects have some similar features.In this paper,the interaction of LESAW with subsurface defects has been studied in detail,and the quantitative detection of such defects by LUT has been discussed.The finite element method and the thermoelastic model of laser ultrasound have been employed to simulate the interaction,and to discuss the influences of burial depth and vertical size of the rectangular defect.Firstly,simulation has been made for the initial interaction of LESAW with the frontier of subsurface defect at the vertical edge.The impact of burial depth on the waveform has been analyzed,and the scattered feature caused by the defect has been extracted and interpreted.It is shown that the arrival time of the reflected surface wave is insensitive to the burial depth when the depth is less than the center wavelength.Then for a fixed burial depth,the influences of vertical size and dimension on scattered echo have been simulated and analyzed.It is found that there exists a specific linear relationship between the arrival time of reflected surface wave and the vertical size of defect.At last,based on the results of the study,an equation for the evaluation of vertical size of defect has been presented.The findings on the interaction between LESAW and subsurface defects may provide possible means for nondestructive testing.

The Theoretical Analyse of the Surface Acoustic Waves Propagated on the Surface of the Bulk Materials with Subsurface Defect

A Novel 3D Evaluation Method for Surface Defects Using Broadband Laser-Generated Rayleigh Waves with Wavenumber Analysis.

Numerical Simulation of Surface Acoustic Wave and Detection of Surface Crack in Steel

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Detecting features of defect metal based on laser ultrasonic technique

Laser-generated Rayleigh Wave for Width Gauging of Subsurface Lateral Rectangular Defects

Finite element based research on ultrasonic spectral characteristic of inner wall defect of metal materials

Modeling and Analysis of Surface Wave EMAT and Its Acoustic Field

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Simulation research of metal defect detection based on laser untrasonic surface wave

Study on the Interaction Mechanism of Laser-Generated Rayleigh Waves and Subsurface Inclined Cracks

Longitudinal Wave Defect Detection Technology Based on Ablation Mechanism

Low Pass Effect of Surface Defect Metal Based on Laser Ultrasonic

Laser-generated Surface Waves for Quantitative Detection of Inclined Surface Cracks Based on Finite Element Analysis

Scattered Echoes from Surface Defect in the Far Field of Rayleigh Wave Generated by Laser

Finite Element Analysis of Laser-Generated Rayleigh Wave for Sizing Subsurface Crack in Frequency Domain

Theoretical Study of the Interaction of Laser Excited Surface Acoustic Waves with Subsurface Deffects

Measurement of surface rectangular defect depth based on laser-excited transmitted surface waves

Finite Element Analysis of Surface Modes in Phononic Crystal Waveguides

Interaction Analysis of Different Defects with Laser Ultrasonic Sound Waves and Defect Characterization

Studying the Propagating Properties of Surface Acoustic Wave Traveling in Functional Gradient Materials by Laser Ultrasonic