Abstract:The work is devoted to the ultrasonic method for controlling mechanical stresses using ultrasonic head waves. The speed of the head ultrasonic wave is the highest, which allows it to be recorded stably among other types of ultrasonic waves and noises. To determine mechanical stresses, registration of the relative change in the velocity of propagation of the head ultrasonic wave is used, corrected for the change in the measured value caused by the change in the temperature of the test object. Thus, mechanical stresses are not measured directly, but the sources of uncertainty are the results of measurements of the propagation velocity of the head ultrasonic wave, the temperature of the environment and the test object, the coefficients of acoustoelastic and thermoacoustic coupling, and the parameters of the optical-acoustic transducer. The contribution of each of these factors to the results of measurements of mechanical stresses is estimated. On the basis of GOST 34100.3–2017, a method has been developed for asessing the uncertainty of measurements of mechanical stresses by the ultrasonic method using head waves. The dependence of the expanded measurement uncertainty on the value of the measured mechanical stresses was obtained. This dependence shows that measurements of mechanical stresses in the range of less than 100 MPa have an uncertainty of more than 10 % of the measured value. When measuring mechanical stresses over 200 MPa, the measurement uncertainty will not exceed 4 % (at a confidence level of 95 %).The proposed approach to assessing the uncertainty of measurements of mechanical stresses can be useful in the development of requirements for the used measuring instruments, alignment samples and control objects, as well as in the development of methods for monitoring mechanical stresses by the ultrasonic method using an optical-acoustic separate-combined transducer.

Analysis of measurement uncertainty of a surface acoustic wave micro-pressure sensor

Uncertainty Evaluation and Optimization of INS Installation Measurement Using Monte Carlo Method

Study on the Influence of Roughness on the Detection for Mechanical Characteristics of the Machined Surface by Surface Acoustic Wave Dispersion Theory

Error Analysis Of Spherical Ultra-Precision Measurement

Uncertainty analysis of a six-degree-of-freedom surface encoder for a planar motion stage

Comparison of Monte Carlo Simulation, Least Square Fitting and Calibration Factor Methods for the Evaluation of Measurement Uncertainty Using Direct Pressure Indicating Devices

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Application of Monte Carlo Method in the Measurement Process Design According to Next Generation of Gps

Uncertainty Evaluation of an In-Flight Absolute Radiometric Calibration Using a Statistical Monte Carlo Method

Modeling and Analysis of Uncertainty in On-Machine Form Characterization of Diamond-Machined Optical Micro-Structured Surfaces

Uncertainty Analysis of Flow Measurement of the VOCs Sampler

A study on mutative scale straightness measurement based on uncertainty analysis

Research on Pressure Measurement Model Using Surface Wave Considering Temperature Effect

METHODOLOGY FOR EVALUATION THE UNCERTAINTY OF MEASUREMENT OF MECHANICAL STRESS BY THE ULTRASONIC METHOD WITH THE HELP OF AN OPTICAL-ACOUSTIC SEPARATE-COMBINED TRANSDUCER

Monte Carlo uncertainty quantification method of pneumatic measurement tube frequency response

Quantitative Evaluation of the Uncertainty of Self-Calibration for Ultra-Precision Stages

Measurement uncertainty evaluation of optical interferometric methane detector

Study on dynamic measurement uncertainty evaluation for CMMs

Pressure Measurement Based on Multi-Waves Fusion Algorithm

Uncertainty Evaluation on Temperature Detection of Middle Atmosphere by Rayleigh Lidar

Uncertainty in the Temperature Measurement System Using Thermocouples