Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

Grey Relational Analysis of Model ParametersˊImpact on DC Bias Simulation Result of Transformer

Analysis and Optimized Suppression of DC Bias in Large AC Power Grid

The No-Load Performance of 3-Phase Transformer Bank under Direct-Current Bias Based on the 3d Transient Analysis

A Review of Research on Transformer DC Bias Caused by HVDC Transmission

Evaluation of the Calculation Method for Stray Losses in Structural Parts of HVDC Converter Transformers

A Comprehensive Coupled Methodology for Calculation and Suppression of DC Bias in UHVDC Transmission Systems

3-D Nonlinear Transient Eddy Current Calculation of Online Power Transformer under DC Bias

3D FEM Simulation Study of a Single-Phase Three-Limb Transformer under DC Bias

Train-earth-grid coupling DC magnetic bias model for stray current diffusion

Research on Grounding Current Distribution in HVDC System Operating in Monopolar Mode

ELECTROMAGNETIC AND THERMAL CHARACTERISTICS SIMULATION FOR THREE-PHASE THREE-LIMB TRANSFORMERS UNDER DC MAGNETIC BIAS

Analysis and Simulation of Transformer DC Bias and Measures of Suppression in Hami Region

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

Research on DC Magnetic Biasing Characteristic of Converter Transformer for AC/DC Corridor-Sharing Power Transmission System

Simulation and Experiment Research on the Effects of DC-Bias Current on the 500kV Power Transformer

Analysis of Excitation Characteristics of Transformers with Different Core Shapes under Severe DC Bias

Effects of Transformer DC Bias and the Relationship Between UHVDC Grounding Current and Grounding Resistances

Effects on Transformer due to UHVDC Mono-polar Operation and Calculation of Ground Electrode Current

Modelling of the DC Flow in AC Systems Considering the Mitigating Measures

Simulation of Losses in Dc-Biased Single Phase Three Limb Transformer

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias