Abstract:Light emission from semiconductors depends not only on the efficiency of carrier injection and recombination but also extraction efficiency. For ultraviolet emission from high band gap materials such as ZnO, nanowires have higher extraction efficiencies than thin films, but conventional approaches for creating a p-n diode result in low efficiency. We exploited the noncentral symmetric nature of n-type ZnO nanowire/p-type GaN substrate to create a piezoelectric ! potential within the nanowire by applying stress. Because of the polarization of ions in a crystal that has noncentral symmetry, a piezoelectric potential (piezopotential) is created in the crystal under stress. The piezopotential acts as a "gate" voltage to tune the charge transport and enhance carrier injection, which is called the piezo-phototronic effect. We propose that band modification traps free carriers at the interface region in a channel created by the local piezoelectric charges. The emission intensity and injection current at a fixed applied voltage have been enhanced by a factor of 17 and 4, respectively, after applying a 0.093% compressive strain and improved conversion efficiency by a factor of 4.25. This huge enhanced performance is suggested arising from an effective increase in the local "biased voltage" as a result of the band modification caused by piezopotential and the trapping of holes at the interface region in a channel created by the local piezoelectric charges near the interface. Our study can be extended from ultraviolet range to visible range for a variety of optoelectronic devices that are important for today's safe, green, and renewable energy technology.

Enhancement of light extraction by ZnO nanostructures on vertical GaN light emitting diodes

GaInN Light-Emitting Diodes with Omni-Directional Reflector Using Nanoporous SnO2 Film

Largely Enhanced Efficiency In Zno Nanowire/P-Polymer Hybridized Inorganic/Organic Ultraviolet Light-Emitting Diode By Piezo-Phototronic Effect

Enhancing Light Emission of Zno Microwire-Based Diodes by Piezo-Phototronic Effect

Optical and Electrical Properties of the LED Using ZnO:Ga Film As Current Diffusion Layer by Sol-gel Technique

Light Extraction Efficiency Enhancement of GaN-based Light Emitting Diodes by a ZnO Current Spreading Layer

Light Extraction Enhancement of GaN LEDs by Hybrid ZnO Micro-Cylinders and Nanorods Array

Enhanced ultraviolet emission and improved spatial distribution uniformity of ZnO nanorod array light-emitting diodes via Ag nanoparticles decoration

Surface-plasmon-enhanced GaN-LED based on the multilayered rectangular nano-grating

Tuning the emission of ZnO nanorods based light emitting diodes using Ag doping

Plasmon-enhanced Electrically Light-emitting from ZnO Nanorod Arrays/p-GaN Heterostructure Devices

Slanted n-ZnO/p-GaN nanorod arrays light-emitting diodes grown by oblique-angle deposition

GaN-Based LEDs Grown on Graphene-Covered SiO2/Si (100) Substrate

High-output power GaN-LED based on surface plasmon enhancement

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Enhanced waveguide-type ultraviolet electroluminescence from ZnO/MgZnO core/shell nanorod array light-emitting diodes via coupling with Ag nanoparticles localized surface plasmons

Light Extraction Improvement from GaN-Based Light-Emitting Diodes with Nano-Patterned Surface Using Anodic Aluminum Oxide Template

Enhancing Light Output of GaN-based Light-Emitting Diodes with Nanoparticle-Assembled On-Top Layers

Enhancement of Light Output Power from LEDs Based on Monolayer Colloidal Crystal

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Fabrication and Luminescent Property of GaN Based Light-emitting Diodes with Array Nanorods Structure