Abstract:This study presents the design, fabrication, and testing of a novel piezoelectric micro-electro-mechanical-systems microphone with the partially removed lead zirconate titanate (PZT) unimorph structure for signal-to-noise ratio (SNR) enhancement. To demonstrate the feasibility of the presented concept, the unimorph cantilever array with the patterned (triangular shape) PZT film on top of a rectangular Si layer is simulated, fabricated, and tested. In comparison, the rectangular and triangular unimorph cantilever arrays with fully covered PZT film are also investigated. The proposed and reference cantilever arrays have the same foot print for fair comparison. Simulations show the proposed design has the highest output electrical energy which indicates the proposed design could successfully enhance the SNR. Moreover, acoustic measurements in the standard anechoic box show the proposed Si cantilever with patterned PZT film design could significantlyimprove the SNR. As compared to the reference microphone with triangular PZT/Si unimorph cantilever, the proposed design shows a 9.8 dB enhancement in SNR. Finally, the influences of initial structure deflections (due to the thin film residual stresses) on the low frequency responses for proposed and reference microphone designs are also investigated.

Design of a New PZT Based Microphone and Microspeaker

Fabrication of a Cantilever Structure for Piezoelectric Microphone

Design Of A New Ferroelectrics-Silicon Integrated Microphone And Microspeaker

A Novel Structure for Pzt-Based Piezoelectric Microphone

Fabrication of high-quality PZT-based piezoelectric microphone

A novel ferroelectric based microphone

Design Optimization of Beam-Like Ferroelectrics-Silicon Microphone and Microspeaker

On the PZT/Si Unimorph Cantilever Design for the Signal-to-noise Ratio Enhancement of Piezoelectric MEMS Microphone

Study on Ferroelectrics-Silicon Integrated Microphone and Microspeaker

Novel In-Plane Polarized PZT Film Based Ultrasonic Micro-Acoustic Device

Directivity Optimization Of Pzt Based Microspeaker Array

Miniature Microphone With Silicon-Based Ferroelectric Thin Films

Study of a Ferroelectrics-Silicon Integrated Microspeaker and Microspeaker Array

Micro Acoustic Devices Using Piezoelectric Films

Design and Optimization of Piezoelectric Cantilever Microphone Based on Silicon

Uniformity Improvement Of Pzt Based Ultrasonic Transducer

On the design of piezoelectric mems microspeaker with high fidelity and wide bandwidth

On the Performance Enhancement of Cantilever Diaphragm Piezoelectric Microphone

High Sensitivity and High S/N Microphone Achieved by PZT Film with Central-Circle Electrode Design

Multi-Way In-Phase/Out-of-Phase Driving Cantilever Array for Performance Enhancement of PZT MEMS Microspeaker