Abstract:Miniature microphones suitable for measurements of ultrasonic wave field scans in air are expensive or lack sensitivity or do not cover the range beyond 100 kHz. It is essential that they are too large for such fields measurements. The use of a ferroelectret (FE) film is proposed to construct a miniature, needle-style 0.5-mm-diameter sensitive element ultrasonic microphone. FE has an acoustic impedance much closer to that of air compared with other alternatives and is low cost and easy to process. The performance of the microphone was evaluated by measuring the sensitivity area map, directivity, ac response, and calibrating the absolute sensitivity. Another novel contribution here is that the sensitivity map was obtained by scanning the focused beam of a laser diode over the microphone surface, producing thermoelastic ultrasound excitation. The electroacoustic response of the microphone served as a sensitivity indicator at a scan spot. Micrometer scale granularity of the FE sensitivity was revealed in the sensitivity map images. It was also demonstrated that the relative ac response of the microphone can be obtained using pulsed laser beam thermoelastic excitation of the whole microphone surface with a laser diode. The absolute sensitivity calibration was done using the hybrid three-transducer reciprocity technique. A large aperture, air coupled transducer beam was focused onto the microphone surface, using the parabolic off-axis mirror. This measurement validated the laser ac response measurements. The FE microphone performance was compared with biaxially stretched polyvinylidene difluoride (PVDF) microphone of the same construction.

Design Of A New Ferroelectrics-Silicon Integrated Microphone And Microspeaker

Design of a new ferroelectrics-silicon integrated microphone and microspeaker

Design Optimization of Beam-Like Ferroelectrics-Silicon Microphone and Microspeaker

Study on Ferroelectrics-Silicon Integrated Microphone and Microspeaker

Study of a Ferroelectrics-Silicon Integrated Microspeaker and Microspeaker Array

Design of a New PZT Based Microphone and Microspeaker

A novel ferroelectric based microphone

Miniature Microphone With Silicon-Based Ferroelectric Thin Films

Design and Optimization of Piezoelectric Cantilever Microphone Based on Silicon

Fabrication of a Cantilever Structure for Piezoelectric Microphone

Fabrication of high-quality PZT-based piezoelectric microphone

A Novel Structure for Pzt-Based Piezoelectric Microphone

On the PZT/Si Unimorph Cantilever Design for the Signal-to-noise Ratio Enhancement of Piezoelectric MEMS Microphone

On the design of piezoelectric mems microspeaker with high fidelity and wide bandwidth

Micro Acoustic Devices Using Piezoelectric Films

Micromachined Piezoelectric Acoustic Device

Development Of A Cmos Compatible Process For Silicon Miniature Microphone With A High Sensitivity

On the design of a two-way piezoelectric MEMS microspeaker based on a multi-shape cantilever array for high-frequency applications

Miniature Ferroelectret Microphone Design and Performance Evaluation Using Laser Excitation

Novel In-Plane Polarized PZT Film Based Ultrasonic Micro-Acoustic Device

On the Design of Piezoelectric MEMS Microspeaker for the Sound Pressure Level Enhancement