Abstract:This study presents the design, fabrication, and testing of a novel piezoelectric micro-electro-mechanical-systems microphone with the partially removed lead zirconate titanate (PZT) unimorph structure for signal-to-noise ratio (SNR) enhancement. To demonstrate the feasibility of the presented concept, the unimorph cantilever array with the patterned (triangular shape) PZT film on top of a rectangular Si layer is simulated, fabricated, and tested. In comparison, the rectangular and triangular unimorph cantilever arrays with fully covered PZT film are also investigated. The proposed and reference cantilever arrays have the same foot print for fair comparison. Simulations show the proposed design has the highest output electrical energy which indicates the proposed design could successfully enhance the SNR. Moreover, acoustic measurements in the standard anechoic box show the proposed Si cantilever with patterned PZT film design could significantlyimprove the SNR. As compared to the reference microphone with triangular PZT/Si unimorph cantilever, the proposed design shows a 9.8 dB enhancement in SNR. Finally, the influences of initial structure deflections (due to the thin film residual stresses) on the low frequency responses for proposed and reference microphone designs are also investigated.

Study on Ferroelectrics-Silicon Integrated Microphone and Microspeaker

Design of a new ferroelectrics-silicon integrated microphone and microspeaker

A novel ferroelectric based microphone

Design Optimization of Beam-Like Ferroelectrics-Silicon Microphone and Microspeaker

Study of a Ferroelectrics-Silicon Integrated Microspeaker and Microspeaker Array

Design of a New PZT Based Microphone and Microspeaker

Miniature Microphone With Silicon-Based Ferroelectric Thin Films

Fabrication of a Cantilever Structure for Piezoelectric Microphone

Design and Optimization of Piezoelectric Cantilever Microphone Based on Silicon

Fabrication of high-quality PZT-based piezoelectric microphone

On the PZT/Si Unimorph Cantilever Design for the Signal-to-noise Ratio Enhancement of Piezoelectric MEMS Microphone

A Novel Structure for Pzt-Based Piezoelectric Microphone

Novel In-Plane Polarized PZT Film Based Ultrasonic Micro-Acoustic Device

Micro Acoustic Devices Using Piezoelectric Films

Research on Bulk Silicon Etching for Piezoelectric Miniature Microphone and Capacitive Miniature Microphone

Micromachined Piezoelectric Acoustic Device

On the design of piezoelectric mems microspeaker with high fidelity and wide bandwidth

Microstructure and properties of PMN PNN PT ferroelectrics/NiCuZn ferrite composites

Piezoelectric and ferroelectric films for microelectronic applications

Microelectromechanical systems based on ferroelectric thin films