Abstract:In this study, a piezoelectric MEMS (Micro-Electro-Mechanical-System) speaker with thoughtfully selected resonant frequencies of dual cantilever units is designed and implemented. Based on the lead zirconium titanate (PZT) thin film with superior piezoelectric coefficient, the cantilever diaphragm is designed through the modal analysis. In the 1.5 mm by 1.5 mm cantilever array, a high-frequency actuation unit with resonance of 13.1 kHz and a low-frequency actuation unit with resonance of 6.35 kHz constitute the proposed piezoelectric MEMS speaker. The boost of sound pressure level (SPL) due to the resonant mode of low-frequency actuation unit reduces the total harmonic distortion (THD) around the subharmonic frequency of high-frequency actuation unit. Meanwhile, the asymmetric triangle diaphragm reduces the maximum stress in the structure when operating at the resonant frequency, thereby mitigating the THD spikes resulting from the nonlinear structural behavior. In pressure-field measurements, the proposed design can reach SPL >= 70.0 dB from 2.7 kHz to 15.0 kHz with only 0.179 Vrms input. At the same time, THD remains below 3.0 % from 3.2 kHz to 20 kHz. The outstanding performance under larger input signal and bias voltage is also verified. Actuated by 0.354 Vrms and 2 VDC bias, the maximum SPL achieves 111.9 dB and the SPL is higher than 80.0 dB from 3.3 kHz to 14.1 kHz. Furthermore, THD is lower than 3.0 % from 1.0 kHz to 8.9 kHz. A promising solution of piezoelectric MEMS speaker for in-ear applications is demonstrated in this study.

Directivity Optimization Of Pzt Based Microspeaker Array

Directivity Analysis Of A Novel Piezoelectric Film Based Ultrasonic Microspeaker Array

Design of a New PZT Based Microphone and Microspeaker

Multi-Way In-Phase/Out-of-Phase Driving Cantilever Array for Performance Enhancement of PZT MEMS Microspeaker

Study of a Ferroelectrics-Silicon Integrated Microspeaker and Microspeaker Array

Sound pressure and low frequency enhancement using novel pzt mems microspeaker design

Monolithic Integration of PZT Actuation Units of Various Activated Resonances for Full-Range Mems Speaker Array

Novel In-Plane Polarized PZT Film Based Ultrasonic Micro-Acoustic Device

A Novel Structure for Pzt-Based Piezoelectric Microphone

Design Optimization of Beam-Like Ferroelectrics-Silicon Microphone and Microspeaker

On the design of a two-way piezoelectric MEMS microspeaker based on a multi-shape cantilever array for high-frequency applications

Uniformity Improvement Of Pzt Based Ultrasonic Transducer

Fabrication of high-quality PZT-based piezoelectric microphone

On the design of piezoelectric mems microspeaker with high fidelity and wide bandwidth

Domain/Boundary Variation in Cantilever Array for Bandwidth Enhancement of PZT MEMS Microspeaker

On the PZT/Si Unimorph Cantilever Design for the Signal-to-noise Ratio Enhancement of Piezoelectric MEMS Microphone

PZT MEMS Speaker Integrated with Silicon-Parylene Composite Corrugated Diaphragm

Micro Acoustic Devices Using Piezoelectric Films

On the Design of Piezoelectric MEMS Microspeaker for the Sound Pressure Level Enhancement

Realizing a finite array of dipole sources with high acoustic transmission directivity at low frequency.

THD Improvement of Piezoelectric MEMS Speakers by Dual Cantilever Units with Well-Designed Resonant Frequencies