Abstract:Methanol to aromatics (MTA) following dual cycles concept unavoidably produced considerable amounts of olefinic intermediates and paraffinic by-products. Their formation and further conversion were vital to improving aromatics production. In this study, a two-stage fluid bed packed with fluid Zn/ZSM-5 catalyst in each stage was used to investigate the MTA reaction at 470 degrees C in the first stage and the secondary conversion of MTA primary products at temperatures from 270 degrees C to 550 degrees C in the second stage with time on stream. During the MTA reaction, the decrease of catalyst acidity was beneficial to controlling hydrogen transfer, thus blocking propane formation. During the secondary conversion of MTA products, at temperatures below 390 degrees C, the alkylation and hydrogen transfer reactions dominated and thus olefins were converted into more alkylbenzene as well as the undesired propane and butane. As the temperature increased from 430 degrees C to 550 degrees C, the aromatization of light hydrocarbon and the dealkylation of alkylbenzene were facilitated, producing more benzene and toluene but increasing methane and ethane yields. Meanwhile, the dehydrogenation and cracking of propane and butane were favored by high temperature and strong acidity so that the yields of ethene and propene increased. It was clarified that the characteristics of secondary conversion of MTA products varied and depended on reaction temperature and catalyst acidity. Based on these findings, the concept of regional functionalization of fluidized bed reactor was proposed for intensification of MTA process based on the reconfiguration of the temperature and acidity of catalyst stream during the fluidized bed reaction-regeneration cycle.

FLUIDIZED BED DEVICE AND METHOD FOR PREPARING PARA XYLENE AND CO PRODUCING LIGHT OLEFINS FROM METHANOL AND/OR DIMETHYL ETHER AND TOLUENE

FLUIDIZED BED APPARATUS AND METHOD FOR PREPARING PARA XYLENE CO PRODUCED LOW CARBON OLEFIN FROM METHANOL AND/OR DIMETHYL ETHER AND TOLUENE

FLUIDIZED BED REACTOR AND METHOD FOR PRODUCING PARA XYLENE AND CO PRODUCING LIGHT OLEFINS FROM BENZENE AND METHANOL AND/OR DIMETHYL ETHER

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation of multi-fluidized-bed in series for methanol to olefins

Turbulent fluidized bed reactor, device and method for preparing propylene and C4 hydrocarbons from oxygen containing compound

Enhanced Reaction Performances For Light Olefin Production From Butene Through Cofeeding Reaction With Methanol

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

Methanol to propylene process using moving bed technology and its engineering study

3D Numerical Simulation of a Large Scale MTO Fluidized Bed Reactor

Method for increasing selectivity of low-carbon olefins in methanol or dimethyl ether converting process

Performance analysis of methanol to olefins process in fluidized bed reactor

High-yield Production of Aromatics from Methanol Using a Temperature-Shifting Multi-Stage Fluidized Bed Reactor Technology

Multiphase catalytic reactors for methanol to olefins

Method and equipment for preparing low carbon olefin from oxygenated compounds

A Multi-Stage Fluidized Bed Strategy for the Enhanced Conversion of Methanol into Aromatics

Conversion of methanol to aromatics in fluidized bed reactor

Transesterification of Methyl Oleate for Sustainable Production of Biolubricant: Process Optimization and Kinetic Study

Reaction-Regeneration Process of Methanol-to-Light Olefins in Fluidized Bed

Temperature-dependent Secondary Conversion of Primary Products from Methanol Aromatization in a Two-Stage Fluidized Bed

Method for increasing yield of propylene