Abstract:A new nondestructive pressure-measurement method that can avoid potential safety problems caused by applying traditional pressure-measurement methods in vessels is presented. This method utilizes ultrasonic Rayleigh waves and critically refracted longitudinal waves ( L CR waves). The change in pressure induces a change in the stresses in the vessel's wall. According to the acoustoelastic principle, variations in stress affect the wave velocity. Meanwhile, the velocity of ultrasonic waves can also be affected by the change in temperature. Considering the effect of the pressure and temperature of the vessel on both the wave velocity and propagation distance of the ultrasonic waves, the relationship between ultrasonic transit time delay and both the pressure and temperature change is established. Furthermore, a modified model of pressure measurement is deduced. With this model, a reference method for temperature compensation, without temperature measurement, is presented. The reference method utilizes Rayleigh waves and L CR waves. These two kinds of ultrasonic waves travel along the axial direction of the vessel's wall, bearing the same changes in pressure and temperature. The relationship between the reference transit time delay between two ultrasonic transducers and the pressure is established through theoretical analysis and calibration tests on an air vessel. To reduce the error caused by the unevenness of temperature distribution, which might occur in the vessel's and the transducer's material, a new kind of transducer is used in the experiment, which has two piezoelectric elements and can be used for the Rayleigh and L CR waves. A pair of such transducers is mounted along the axial direction of the air vessel. The penetration area of the Rayleigh wave is almost the same as that of the L CR wave with the use of the new transducers. Comparison tests between the new transducers and the custom-used transducers show that the new transducers have better repeatability. Finally, using the air vessel as a specimen, experimental results show that the reference method is effective and that the pressure values calculated using the reference method are close to the manometer-measured values.

Impact of Pressure Difference on Leakage Rate from Rigid Positive Standard Leak:A Theoretical and Experimental Study

Research on Improving the System Sensitivity for Hot Helium Leak Test

Dynamic Leakage Test of a Voluminous Container Using SF 6 Gaseous Tracer

STUDY ON LEAKAGE OF PRESSURE LEAK WITH DIFFERENT PRESSURES

Numerical Study of Hydrogen Leakage and Explosion in Hydrogen Refueling Station with Large Volume Hydrogen Storage Vessels

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and L-Cr Waves

Study on Leak Rate of Gas Medium in Leak-Before-Break Technique-Ii: Theoretical Studies

Leak Model and Numerical Simulation of Pressure Vessel Based on Joule-Thomson Effect

Experimental Study on Telemetry of Hydrogen Leakage Based on Raman Spectroscopy

Theoretical investigation on heat leakage distribution between vapor and liquid in liquid hydrogen tanks

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and <formula> <tex>$l_{\rm CR}$</tex> </formula> Waves

Study on the Joule-Thomson Effect During Leakage in High Pressure Vessels

High‐pressure under‐expanded hydrogen leakage model considering gas‐wall friction loss

A Study on the Pressure Leakage Correction of Pistonphones at Infrasonic Frequencies

Release Models for Leaks from High-Pressure Hydrogen Storage Systems

Experimental study on hydrogen pipeline leakage: Negative pressure wave characteristics and inline detection method

Real Time Calibration for Ultrasensitive Leak Detection

Experimental investigation of rectangular nozzle aspect ratio effects on high-pressure helium leakage characteristics

Leakage Rate of Gas in Leak-Before-break Technique

Theory of the leak-rate of seals

Quantitative analysis of hydrogen leakage and diffusion processes based on real-time concentration measurement at different spatial positions in a customized chamber