Leak Model and Numerical Simulation of Pressure Vessel Based on Joule-Thomson Effect

AI Gang,LIU Ying-hua
DOI: https://doi.org/10.3969/j.issn.1001-4837.2015.09.001
2015-01-01
Abstract:A method was proposed to simulate the heat transfer process of high pressure argon gas leaking through a narrow crack which caused by the Joule-Thomson cooling effect.Currently,Leak-before-Break (LBB)design codes for pressure vessels do not take into account of the subsequent low temperature de-pression and the drop in fracture toughness in the aftermath of a leak.A one-way coupling model was de-veloped to calculate the pressure and temperature drops of leaking gas.A heat transfer simulation then was performed to calculate the temperature distribution in the metal.The Redlich-Kwong (RK)[1] equation with a relatively high accuracy was adopted to evaluate the gas temperature change during a leak.The modified Petukhov correlation[3]by Adams[2]et al.was employed to evaluate the gas heat transfer coefficient. For the initial temperature of 30 ℃ and pressure of 91 MPa,the simulated lowest temperature of the test plate in the vicinity of the crack is 13.8 ℃.An experiment rig designed and tested under the same conditions showed a good agreement with the simulation result at the obtained lowest temperature in the test plate.
What problem does this paper attempt to address?