Abstract:As a key factor affecting thermal behaviors of liquid hydrogen (LH2) tanks, heat leakage plays an important role in accurate prediction of pressure build-up for safe storage and transportation of LH2. Uniform heat flux between vapor and liquid in LH2 tanks is widely adopted as thermal boundary condition in predicting pressure build-up process. However, a distribution of heat flux between vapor and liquid was observed during the self -pressurization process in the experimental test. In light of this, an analytically theoret-ical model of revealing the energy exchange process among the vapor, liquid and inner wall is proposed to investigate the heat leakage distribution ratio (HDR) between vapor and liquid in LH2 tanks. The feasibility of the model is validated by the experimental results from NASA. In the whole self-pressurization process of 25,000 s, HDR reduces from 0.803 to 0.235 under a liquid fill ratio of 90% and a total heat leakage of 71.3 W. The results show that the existence of inner wall and different thermal properties between the vapor and liquid make the heat leakage flux non-uniformly distributed into the vapor and liquid. And the geometric structure of tank, thermal properties and initial states of the vapor and liquid have a significant effect on HDR. When coupling the model with thermal multi-zone model, the relative error in pressure prediction is reduced by 61.8% against experimental results. Benefiting from the coupled model, the relative error in pressure prediction caused by the uniform heat flux boundary condition reduces from 90.16% to 8.15%. The present work establishes theoretical foundation on analyzing heat leakage distribution between the vapor and liquid for LH2 tanks, and provides useful guidance on modifying boundary conditions in accurately predicting thermal behaviors of LH2 tanks.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Release Models for Leaks from High-Pressure Hydrogen Storage Systems

Numerical Study of Hydrogen Leakage and Explosion in Hydrogen Refueling Station with Large Volume Hydrogen Storage Vessels

Numerical Simulation on the Leakage and Diffusion of Hydrogen in Indoor Environment

Leak Detection Design for ITER GIS Gas Fueling Manifold

Theoretical investigation on heat leakage distribution between vapor and liquid in liquid hydrogen tanks

Prediction of State Property, Flow Parameter and Jet Flame Size During Transient Releases from Hydrogen Storage Systems

Thermal Models for Self-Pressurization Prediction of Liquid Hydrogen Tanks: Formulation, Validation, Assessment, and Prospects

Comparison of numerical and algebraic models of low and high pressure hydrogen jet flows with ideal and real gas models

Simulation of small-scale releases from liquid hydrogen storage systems

Numerical Simulation on the Diffusion of Hydrogen Due to High Pressured Storage Tanks Failure

Numerical Simulation of Hydrogen Release from High-Pressure Storage Vessel

Study on real-gas equations of high pressure hydrogen

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Modeling and analysis of minor seal leakages in high-pressure hydrogen valves under extreme environmental temperatures

A numerical study of hydrogen leakage and diffusion in a hydrogen refueling station

Crack Growth Analysis Of High-Pressure Equipment For Hydrogen Storage

Leak Model and Numerical Simulation of Pressure Vessel Based on Joule-Thomson Effect

Numerical simulation of leakage jet flame hazard of high-pressure hydrogen storage bottle in open space

Dynamic evolution of leakage and explosion accident in high pressure hydrogen storage system

High‐pressure under‐expanded hydrogen leakage model considering gas‐wall friction loss

Numerical Simulation on Pressure Evolution Process of Liquid Hydrogen Storage Tank with Active Cryogenic Cooling