Abstract:As a key factor affecting thermal behaviors of liquid hydrogen (LH2) tanks, heat leakage plays an important role in accurate prediction of pressure build-up for safe storage and transportation of LH2. Uniform heat flux between vapor and liquid in LH2 tanks is widely adopted as thermal boundary condition in predicting pressure build-up process. However, a distribution of heat flux between vapor and liquid was observed during the self -pressurization process in the experimental test. In light of this, an analytically theoret-ical model of revealing the energy exchange process among the vapor, liquid and inner wall is proposed to investigate the heat leakage distribution ratio (HDR) between vapor and liquid in LH2 tanks. The feasibility of the model is validated by the experimental results from NASA. In the whole self-pressurization process of 25,000 s, HDR reduces from 0.803 to 0.235 under a liquid fill ratio of 90% and a total heat leakage of 71.3 W. The results show that the existence of inner wall and different thermal properties between the vapor and liquid make the heat leakage flux non-uniformly distributed into the vapor and liquid. And the geometric structure of tank, thermal properties and initial states of the vapor and liquid have a significant effect on HDR. When coupling the model with thermal multi-zone model, the relative error in pressure prediction is reduced by 61.8% against experimental results. Benefiting from the coupled model, the relative error in pressure prediction caused by the uniform heat flux boundary condition reduces from 90.16% to 8.15%. The present work establishes theoretical foundation on analyzing heat leakage distribution between the vapor and liquid for LH2 tanks, and provides useful guidance on modifying boundary conditions in accurately predicting thermal behaviors of LH2 tanks.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Modeling and analysis of minor seal leakages in high-pressure hydrogen valves under extreme environmental temperatures

Review on Hydrogen-Induced Failure of Rubber O-Rings for High Pressure Hydrogen Storage Tanks

Numerical Study of Hydrogen Leakage and Explosion in Hydrogen Refueling Station with Large Volume Hydrogen Storage Vessels

Effect of Swelling Behavior of Rubber Rings on the Sealing Performance for 70MPA Hydrogen Pressure Reducing Valves

Numerical Simulation on the Leakage and Diffusion of Hydrogen in Indoor Environment

Numerical Simulation on Hydrogen Induced Cracking Behavior of 4130X Hydrogen Storage Vessel with Defect

Theoretical investigation on heat leakage distribution between vapor and liquid in liquid hydrogen tanks

Seal Contact Performance Analysis of Soft Seals on High-Pressure Hydrogen Charge Valves

Analysis of the evolution characteristics of hydrogen leakage and diffusion in a temperature stratified environment

Characterization of long-term evolution of leakage rates of O-ring seals in nuclear power plant under high-temperature and high-pressure conditions

Sealing performance analysis of rubber O-ring in high-pressure gaseous hydrogen based on finite element method

Release Models for Leaks from High-Pressure Hydrogen Storage Systems

Experimental and Simulation Research on Hydrogen Leakage of Double Ferrule Joints

Design Fatigue Life Evaluation of High-Pressure Hydrogen Storage Vessels Based on Fracture Mechanics

Study on fretting behavior of rubber O-ring seal in high-pressure gaseous hydrogen

Modeling of hydrogen atom distribution at corrosion defect on existing pipelines repurposed for hydrogen transport under pressure fluctuations

High‐pressure under‐expanded hydrogen leakage model considering gas‐wall friction loss

Analytical and Numerical Predictions of Hydrogen Gas Flow Induced by Wall and Corner Leakages in Confined Space

A review on effect of hydrogen on rubber seals used in the high-pressure hydrogen infrastructure

Quantitative analysis of hydrogen leakage and diffusion processes based on real-time concentration measurement at different spatial positions in a customized chamber

Transient Flow Characteristic of High-Pressure Hydrogen Gas in Check Valve During the Opening Process