Abstract:At present, many vacuum devices based on nanotechnology are widely used. The life time of the device depends mainly on the outgassing rate and the seal leak rate of the device. The leak rate is required to be less than 10 -14 Pam 3 /s in some application fields of long-life and high reliability devices. To solve this problem, the ultra-high vacuum leak detection apparatus with the lower limit of 10 -16 Pam 3 /s was developed with accumulation and comparison method. Compared with the conventional method of dynamic leak detection method, the accumulation method has the advantage of extending the lower limit to 10 -16 Pam 3 /s. The apparatus consists of an accumulation comparison system and a standard gas flowmeter with the constant conductance method. The constant conductance element is an important part of the flowmeter, of which the conductance can achieve a constant value of 10 -10 m 3 /s by using the laser drilling and multi-coating technology. The inlet pressure of the element can be as low as 10 -6 Pa with the static expansion method. During the accumulation, a quadruple mass spectrometer (QMS) was used to measure the ion current increment caused by the leak gas, with a non-evaporable getter (NEG) pump working in the accumulation chamber. Experimental results show that the leak detection range of the apparatus is from 10 -10 Pam 3 /s to 10 -16 Pam 3 /s with the relative standard uncertainty of 2%~10%. This technology can be used for leak detection of nano devices, and it has broad application prospects in all kinds of small leakage detection field.

Real Time Calibration for Ultrasensitive Leak Detection

Research on Improving the System Sensitivity for Hot Helium Leak Test

A study on integrated system of tracer gas leakage detection in detonation experiment

Experimental Study on Telemetry of Hydrogen Leakage Based on Raman Spectroscopy

Ultra-high vacuum leak detection technology with the lower limit of 10 −16 Pam 3 /s for nano devices

Parallel Coupling of Ion Mobility Spectrometry and Ion Trap Mass Spectrometry for the Real-Time Alarm Triggering and Identification of Hazardous Chemical Leakages

Calibration Device for Reference Leak Value by Soap Film Flowmeter

Development of an Automatic Calibration Device for High-Accuracy Low Temperature Thermometers

Calibration of a QMS System for High-Sensitivity Gas Permeation Measurement

Valve leak testing and leakage rate calibration based on acoustic emission

Ultra-high vacuum leak detection technology with the lower limit of 10<sup>−16</sup>Pam<sup>3</sup>/s for nano devices

Impact of Pressure Difference on Leakage Rate from Rigid Positive Standard Leak:A Theoretical and Experimental Study

Novel Type of Portable Vacuum Leak Calibrator Apparatus

A Dual-Function Leak Detector for Mems Devices

Leakage detection methods and characteristics for large-size metallic ultra-high vacuum system

Ultrasensitive Leak Detection During Ultrahigh Vacuum Evacuation by Quadrupole Mass Spectrometer

A leak detection system for sealed devices with perfluorotributylamine

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

High-sensitivity gas leak detection sensor based on a compact microphone array

Implementation of Ultrasonic Sensing for High Resolution Measurement of Binary Gas Mixture Fractions