Abstract:At present, many vacuum devices based on nanotechnology are widely used. The life time of the device depends mainly on the outgassing rate and the seal leak rate of the device. The leak rate is required to be less than 10 -14 Pam 3 /s in some application fields of long-life and high reliability devices. To solve this problem, the ultra-high vacuum leak detection apparatus with the lower limit of 10 -16 Pam 3 /s was developed with accumulation and comparison method. Compared with the conventional method of dynamic leak detection method, the accumulation method has the advantage of extending the lower limit to 10 -16 Pam 3 /s. The apparatus consists of an accumulation comparison system and a standard gas flowmeter with the constant conductance method. The constant conductance element is an important part of the flowmeter, of which the conductance can achieve a constant value of 10 -10 m 3 /s by using the laser drilling and multi-coating technology. The inlet pressure of the element can be as low as 10 -6 Pa with the static expansion method. During the accumulation, a quadruple mass spectrometer (QMS) was used to measure the ion current increment caused by the leak gas, with a non-evaporable getter (NEG) pump working in the accumulation chamber. Experimental results show that the leak detection range of the apparatus is from 10 -10 Pam 3 /s to 10 -16 Pam 3 /s with the relative standard uncertainty of 2%~10%. This technology can be used for leak detection of nano devices, and it has broad application prospects in all kinds of small leakage detection field.

A Dual-Function Leak Detector for Mems Devices

Bubble Counter Based on Photoelectric Technique for Leakage Detection of Cryogenic Valves

A novel test method of low leakage rate of MEMS vacuum packaging

Ultra-high vacuum leak detection technology with the lower limit of 10 −16 Pam 3 /s for nano devices

Ultra-high vacuum leak detection technology with the lower limit of 10<sup>−16</sup>Pam<sup>3</sup>/s for nano devices

Ultrasensitive Leak Detection During Ultrahigh Vacuum Evacuation by Quadrupole Mass Spectrometer

MEMS vacuum packaging technology and applications

A MEMS Friction Gauge For High Vacuum Measurement

Real Time Calibration for Ultrasensitive Leak Detection

High-sensitivity gas leak detection sensor based on a compact microphone array

Leakage detection methods and characteristics for large-size metallic ultra-high vacuum system

Fabrication of Hermetic Cell Using MEMS Technology

Performance Study of a Micro-Pattern Gas Detector: Leak Microstructure

Precise measurement of micro bubble resonator thickness by internal aerostatic pressure sensing.

A MEMS-Type Ionization Vacuum Sensor with a Wide Measurement Range

Study on in situ mass spectrometry leak detection technique of working fluid in spacecraft electric propulsion system

Special Micro-electro-mechanical Systems Pressure Sensor

A Composite-Type MEMS Pirani Gauge for Wide Range and High Accuracy

Novel Type of Portable Vacuum Leak Calibrator Apparatus

MEMS-on-fiber sensor combining silicon diaphragm and supporting beams for on-line partial discharges monitoring