Abstract:At present, many vacuum devices based on nanotechnology are widely used. The life time of the device depends mainly on the outgassing rate and the seal leak rate of the device. The leak rate is required to be less than 10 -14 Pam 3 /s in some application fields of long-life and high reliability devices. To solve this problem, the ultra-high vacuum leak detection apparatus with the lower limit of 10 -16 Pam 3 /s was developed with accumulation and comparison method. Compared with the conventional method of dynamic leak detection method, the accumulation method has the advantage of extending the lower limit to 10 -16 Pam 3 /s. The apparatus consists of an accumulation comparison system and a standard gas flowmeter with the constant conductance method. The constant conductance element is an important part of the flowmeter, of which the conductance can achieve a constant value of 10 -10 m 3 /s by using the laser drilling and multi-coating technology. The inlet pressure of the element can be as low as 10 -6 Pa with the static expansion method. During the accumulation, a quadruple mass spectrometer (QMS) was used to measure the ion current increment caused by the leak gas, with a non-evaporable getter (NEG) pump working in the accumulation chamber. Experimental results show that the leak detection range of the apparatus is from 10 -10 Pam 3 /s to 10 -16 Pam 3 /s with the relative standard uncertainty of 2%~10%. This technology can be used for leak detection of nano devices, and it has broad application prospects in all kinds of small leakage detection field.

A novel test method of low leakage rate of MEMS vacuum packaging

High Vacuum Packaging of MEMS Devices Containing Heterogeneous Discrete Components

MEMS vacuum packaging technology and applications

A Dual-Function Leak Detector for Mems Devices

Design and Fabrication of MEMS Acceleration Sensor for Device-Level Vacuum Packaging

Ultra-high vacuum leak detection technology with the lower limit of 10<sup>−16</sup>Pam<sup>3</sup>/s for nano devices

Ultra-high vacuum leak detection technology with the lower limit of 10 −16 Pam 3 /s for nano devices

A micro-machined Pirani gauge for vacuum measurement of ultra-small sized vacuum packaging

Fabrication and wafer-level vacuum packaging of MEMS resonant pressure sensor

Design and Fabrication of High Performance Wafer-Level Vacuum Packaging Based on Glass–silicon–glass Bonding Techniques

Chip-levelVacuum Package and Test of Resonant MEMS Electric Field Sensor

A MEMS Friction Gauge For High Vacuum Measurement

Wafer Level Vacuum Packaging of MEMS-Based Uncooled Infrared Sensors

New Low-Cost MEMS Capacitive Pressure Sensor Concept

A Novel Method For The Micro-Clearance Measurement Of A Precision Spherical Joint Based On A Spherical Differential Capacitive Sensor

Novel Method of Fabricating Fabry-Perot Cavity Employing MEMS Wet-Etching Process

A Laser-Assisted Bonding Method Using a Liquid Crystal Polymer Film for MEMS and Sensor Packaging

Design and Implementation of Monolithically Integrated Sealed and Unsealed Chambers by Using the Wafer Level Packaging

Design, Test and Evaluation of a Novel Die-Attach Structure for Packaging Stress Suppression of MEMS Resonant Accelerometers

Modulate the Chamber Pressure of the Hermetic Sealed Mems Device by Varying the Cavity Depth of Cap Si