Abstract:This article presents a micromachined resonant micro-pressure sensor, which consists of a SOI wafer for pressure sensing and a glass cap for vacuum packaging. More specifically, two resonators fabricated in device layer of SOI wafer were positioned around the center and border of pressure-sensitive diaphragm respectively with the purposed of transforming pressure. Simulations based on finite element analysis were applied to the design and optimization of the micro-pressure sensor where technical issues correlated with mechanical coupling and overloading were addressed properly. The micro-pressure sensors were fabricated by silicon based bulk-micromachining processes, and characterized by both open-loop and closed-loop testing. The characterization results revealed quality factors higher than 25000 in full pressure (0.05 kPa to 10 kPa) and temperature (−40°C to 85°C) scales, and at least 12 times of anti-overload capabilities for developed sensors. The differential pressure sensitivities were quantified as 615.47±9.82 Hz/kPa (−40°C), 589.56±4.34 Hz/kPa (15°C) and 561.70 ±8.75 Hz/kPa (85°C) respectively, as well the repeatability, hysteresis, and nonlinearity were calculated as 0.0485±0.0032%, 0.0299±0.0018%, and 0.0493±0.0025% respectively for the developed sensors. Meanwhile, the maximum fitting deviations were quantified within ±5.24 Pa in full pressure (0.05 kPa to 10 kPa) and temperature (−40°C to 85°C) scales, demonstrating accuracies of 0.0524% full scale, further indicating that the developed sensor is a potential candidate in the field of micro-pressure measurements.

Precise measurement of micro bubble resonator thickness by internal aerostatic pressure sensing.

Optical Spring Effect In Micro-Bubble Resonators And Its Application For The Effective Mass Measurement Of Optomechanical Resonant Mode

Micro-Raman measurement of thickness in microelectromechanical silicon structures

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

High-sensitivity strain sensor based on an asymmetric tapered air microbubble Fabry-Pérot interferometer with an ultrathin wall

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

Phase Critical Angle Scattering for Measurement of Transient Nanoscale Growth Rate of a Micron-Sized Bubble.

High-resolution micro force sensing using a microbubble probe resonator

Gas identification in high-<i>Q</i> microbubble resonators

New silicon micromechanical resonant viscosity vacuum gage

A MEMS Resonant Differential Pressure Sensor With High Accuracy by Integrated Temperature Sensor and Static Pressure Sensor

An ultracompact refractive index gas-sensor based on photonic crystal microcavity

Optomechanical Density Sensor for Sample Consumption of Dozens of Nano-Liters Based on Microbubble Microcavity

A Micromachined Resonant Micro-Pressure Sensor

2-D Optical/opto-Mechanical Microfluidic Sensing with Micro-Bubble Resonators.

A Lateral Differential Resonant Pressure Microsensor Based on SOI-Glass Wafer-Level Vacuum Packaging

A resonant high-pressure microsensor based on a composite pressure-sensitive mechanism of diaphragm bending and volume compression

Spatially Resolved Thickness Analysis Of Microscale Structures Using Micro-Raman Spectroscopy

Machine learning-assisted high-accuracy and large dynamic range thermometer in high-Q microbubble resonators

A Novel Piezoresitive Microphone MEMS Sensor For Aerospace Applications

Characterizing the Pressure Field in a Modified Microbubble Flow Cytometer: Using a Laser Doppler Vibrometer to Validate the Internal Pressure