Abstract:This paper proposes a piezoresistive high-temperature absolute pressure sensor based on (100)/(111) hybrid SOI (silicon-on-insulator) silicon wafers, where the active layer is (100) silicon and the handle layer is (111) silicon. The 1.5 MPa ranged sensor chips are designed with the size as tiny as 0.5 × 0.5 mm, and the chips are fabricated only from the front side of the wafer for simple, high-yield and low-cost batch production. Herein, the (100) active layer is specifically used to form high-performance piezoresistors for high-temperature pressure sensing, while the (111) handle layer is used to single-side construct the pressure-sensing diaphragm and the pressure-reference cavity beneath the diaphragm. Benefitting from front-sided shallow dry etching and self-stop lateral wet etching inside the (111)-silicon substrate, the thickness of the pressure-sensing diaphragm is uniform and controllable, and the pressure-reference cavity is embedded into the handle layer of (111) silicon. Without the conventionally used double-sided etching, wafer bonding and cavity-SOI manufacturing, a very small sensor chip size of 0.5 × 0.5 mm is achieved. The measured performance of the 1.5 MPa ranged pressure sensor exhibits a full-scale output of approximately 59.55 mV/1500 kPa/3.3 VDC in room temperature and a high overall accuracy (combined with hysteresis, non-linearity and repeatability) of 0.17%FS within the temperature range of −55 °C to 350 °C. In addition, the thermal hysteresis is also evaluated as approximately 0.15%FS at 350 °C. The tiny-sized high temperature pressure sensors are promising in various industrial automatic control applications and wind tunnel testing systems.

A Lateral Differential Resonant Pressure Microsensor Based on SOI-Glass Wafer-Level Vacuum Packaging

Fabrication and wafer-level vacuum packaging of MEMS resonant pressure sensor

A Micromachined Resonant Micro-Pressure Sensor

A Resonant Low-Pressure Microsensor With Low Temperature Disturbance

Reduction of Temperature Sensitivity for Resonant Micro-Pressure Sensor Using Glass-Silicon Coupling Wafer Packaging

A High-sensitivity, Small-size Resonant Pressure Microsensor Based on Optimized Resonator-diaphragm Structure.

An SOI-Structured Piezoresistive Differential Pressure Sensor with High Performance

A high performance micro-pressure sensor based on a double-ended quartz tuning fork and silicon diaphragm in atmospheric packaging

A MEMS Resonant Differential Pressure Sensor With High Accuracy by Integrated Temperature Sensor and Static Pressure Sensor

Inverted-Cup High-Temperature and High-Frequency Piezoresistive Pressure Sensor

A resonant high-pressure microsensor based on a composite pressure-sensitive mechanism of diaphragm bending and volume compression

Highly Sensitive Seesaw Capacitive Pressure Sensor Based on SOI Wafer

Wafer-Level Self-Packaging Design and Fabrication of MEMS Capacitive Pressure Sensors

A high pressure sensor with circular diaphragm based on MEMS technology

A Single-Side Micromachined MPa-Scale High-Temperature Pressure Sensor

High Accuracy Resonant Pressure Sensor With Balanced-Mass DETF Resonator and Twinborn Diaphragms

Resonant MEMS Pressure Sensor in 180 nm CMOS Technology Obtained by BEOL Isotropic Etching

Modelling and Characterisation of a Micromachined Resonant Pressure Sensor with Piezoelectric Excitation and Sensing

An Electrostatic Comb Excitation Resonant Pressure Sensor for High Pressure Applications

Micro-machined Resonant Out-of-plane Accelerometer with a Differential Structure Fabricated by Silicon-on-insulator–mems Technology

All-Quartz High Accuracy MEMS Pressure Sensor Based on Double-Ended Tuning Fork Resonator