Abstract:The aim of the present work was to identify the conditions for the preparation of stable zirconia slurries with high solids content for the production of aqueous gel tape casting objects with improved properties. Influences of the powder and dispersant on the rheological properties were investigated. High stable low-viscosity nanoparticles zirconia suspensions were achieved. Nanometer-sized tetragonal polycrystal zirconia powder was synthesized by a new low-temperature environment-benign method. The oxide powders were confirmed to be 3Y-TZP single phase with tetragonal structure measured by X-ray diffraction analysis. Acryl amide (AM) and N,N′-methylene bisacrylamide (MBAM) have been used as organic monomer and cross-linker of the process, respectively. NH4PAA (M=5000–8000) has been used as polyelectrolyte dispersant. The electrokinetic behavior of nanometer-sized zirconia suspensions stabilized by various dispersant contents was studied. The result indicated the dispersant concentration greatly affected the surface charge of nanometer tetragonal zirconia powder. The isoelectric point (IEP) obviously changed from 8.1 to about 4.7 because of the addition of polyelectrolyte dispersant. To acquire stable low-viscosity slurries, the influences of several parameters on rheological behavior of nanosized tetragonal zirconia suspensions were investigated. It was found that for each factor, there exists an optimum range in which low viscosity was achieved for a slurry with high solid loading. For the slurry of 77 wt.% powder concentration with about 1.0 wt.% polyelectrolyte (based on the powder), the viscosity was 350 mPa s at the shear rate of 110 s−1. The slurry at the optimum conditions met the demands of aqueous gel tape casting process.

Sintering and behavior of nanometer tetragonal polycrystalline zirconia films by aqueous gel tape casting process

Polymerizing Mechanism and Technical Factors Optimization of Nanometer Tetragonal Polycrystalline Zirconia Slurries for the Aqueous-Gel-tape-casting Process

Rheological properties of nanometer tetragonal polycrystal zirconia slurries for aqueous gel tape casting process

Influence of Process Factors on Polymerizing Behaviors of Nano-Sized Tetragonal Polycrystals Zirconia Slurries

Gel-Tape Casting of Yttria Stabilized Zirconia Thin Film

Influence of Polyelectrolyte Dispersant on Slip Preparation of Nano-Sized Tetragonal Polycrystals Zirconia for Aqueous-Gel-tape-casting Process

Effects of Grain Gradation in the System of Gel-Casting Zirconia Ceramic

Optimization of the Tape Casting Slurries for High-Quality Zirconia Substrates

Preparation Of Zta Powders By Spray Granulation And Properties Of Sintered Zta Composites

Preparation of High Concentrated Suspension and Gelcasting Process for Silicon Nitride Bonded Silicon Carbide Refractories

Study on Gelcasting of Silicon Nitride-Bonded Silicon Carbide Refractories

Forming and Sintering of Y-TZP Nanoceramics

Formation of Silicon Nitride Bonded Silicon Carbide by Aqueous Gelcasting

Thermally stable nanocrystallised mesoporous zirconia thin films

Effects of Zro_2 Powder Characteristics and Organic Additives on Preparation of Tape Casting Film

Aqueous Gelcasting of ZrB2–SiC Ultra High Temperature Ceramics

Study on gelcasting and properties of recrystallized silicon carbide

Study On Gel-Tape Casting In The Mixed Polyvinyl Alcohol And Acrylamide Systems

Synthesis and characterization of nanocrystalline PZT powders by a simple sol-gel method

Sintering Behavior and Mechanical Properties of Alumina-Coated Zirconia Ceramics

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium