Abstract:The aim of the present work was to identify the conditions for the preparation of stable zirconia slurries with high solids content for the production of aqueous gel tape casting objects with improved properties. Influences of the powder and dispersant on the rheological properties were investigated. High stable low-viscosity nanoparticles zirconia suspensions were achieved. Nanometer-sized tetragonal polycrystal zirconia powder was synthesized by a new low-temperature environment-benign method. The oxide powders were confirmed to be 3Y-TZP single phase with tetragonal structure measured by X-ray diffraction analysis. Acryl amide (AM) and N,N′-methylene bisacrylamide (MBAM) have been used as organic monomer and cross-linker of the process, respectively. NH4PAA (M=5000–8000) has been used as polyelectrolyte dispersant. The electrokinetic behavior of nanometer-sized zirconia suspensions stabilized by various dispersant contents was studied. The result indicated the dispersant concentration greatly affected the surface charge of nanometer tetragonal zirconia powder. The isoelectric point (IEP) obviously changed from 8.1 to about 4.7 because of the addition of polyelectrolyte dispersant. To acquire stable low-viscosity slurries, the influences of several parameters on rheological behavior of nanosized tetragonal zirconia suspensions were investigated. It was found that for each factor, there exists an optimum range in which low viscosity was achieved for a slurry with high solid loading. For the slurry of 77 wt.% powder concentration with about 1.0 wt.% polyelectrolyte (based on the powder), the viscosity was 350 mPa s at the shear rate of 110 s−1. The slurry at the optimum conditions met the demands of aqueous gel tape casting process.

Effects of Zro_2 Powder Characteristics and Organic Additives on Preparation of Tape Casting Film

Aqueous Tape Casting and Mechanical Properties of La2NiO4+δ Dense Membranes

Optimization of the Tape Casting Slurries for High-Quality Zirconia Substrates

Gel-Tape Casting of Yttria Stabilized Zirconia Thin Film

Effects of Additives on Alumina Sheets Forming by A Novel Gel-Tape-Casting

Influence of Polyelectrolyte Dispersant on Slip Preparation of Nano-Sized Tetragonal Polycrystals Zirconia for Aqueous-Gel-tape-casting Process

Rheological properties of nanometer tetragonal polycrystal zirconia slurries for aqueous gel tape casting process

Influence of drying conditions and plasticizer‐to‐binder ratio on the water‐based tape casting of La0.6Sr0.4Co0.2Fe0.8O3−δ

Fabrication and characterization of Li1+x-yNb1-x-3yTix+4yO3 substrates using aqueous tape casting process

Boron Carbide Non Aqueous Tape Casting Process

Polymerizing Mechanism and Technical Factors Optimization of Nanometer Tetragonal Polycrystalline Zirconia Slurries for the Aqueous-Gel-tape-casting Process

Influence Of Solids Loading On Water-Based Tape Casting Of Li1.075nb0.625ti0.45o3 Ceramic For Ltcc Application

Preparation and microwave dielectric properties of multilayer Li 1.075 Nb 0.625 Ti 0.45 O 3 co-fired ceramics with aqueous tape casting

Aqueous Tape Casting of Boron Carbide Ceramic

Influence of Process Factors on Polymerizing Behaviors of Nano-Sized Tetragonal Polycrystals Zirconia Slurries

Rheological Properties and Gelcasting Behavior of Ultrafine Zro2 Suspension

Study On Gel-Tape Casting In The Mixed Polyvinyl Alcohol And Acrylamide Systems

Aqueous processing of Li1.075Nb0.625Ti0.45O3 green tapes

Gel-Tape-Casting Of Ceramic Substrates

Effect of Chopped ZrO2 Fiber Content on the Microstructure and Properties of CaO-Based Integral Ceramic Mold

The Study of the Tape Casting Processing's Influence on the Templates