Abstract:The synthesis of nanoscale CaB6 powder via the low temperature chemical reaction of Calcium chloride (CaCl2) with Sodium Borohyride (NaBH4) in vacuum has been investigated in this study. The reaction temperature was determined by differential scanning calorimetry and thermogravimetric analysis (DSC and TG). Crystallization process was provided through studying the influence of heat preservation time on the crystal particles morphologies in vacuum. X-ray diffraction (XRD) was used to investigate the phase and structure of CaB6. The characterization for microstructure was performed by transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The elemental analysis was conducted by X-ray photoelectron spectroscopy (XPS). It is concluded that CaB6 nanoparticles can be successfully prepared under low temperature at 500 degrees C. The results showed that in vacuum, 2 hours heat preservation time is enough for the reaction to complete at this temperature. The average size of crystal grains is 25.1 nm with high crystallinity and cubic shaped, which particles size is at the range of 20-100 nm. Longer heat preservation time more than 2 hours will make CaB6 particles connected together to form hard aggregations, that is the sintering process occurred under this temperature. However, the crystal grain size changed unobviously accompanying the holding time prolong due to the high chemical stability of CaB6. The atomic ratio of B to Ca is 5.37:1, less than but close to its stoichiometric ratio 6:1. The synthesis process and mechanism were investigated in this paper.

Low‐temperature Synthesis of Tungsten Diboride Powders Via a Simple Molten Salt Route

Molten Salt Synthesis of ZnNb{sub 2}o{sub 6} Powder

Molten salt synthesis of rod-like tungsten bronze niobate particles

Process analysis and mechanism investigation of low temperature synthesis of nanoscale calcium hexaboride powder.

General Synthesis of Single‐Crystal Tungstate Nanorods/Nanowires: A Facile, Low‐Temperature Solution Approach

Synthesis, Phase Evolutions, and Stabilities of Boron-Rich Tungsten Borides at High Pressure.

Molten salt synthesis of orthorhombic CrB and Cr2AlB2 ceramics

Size-controlled preparations of tungsten and molybdenum borides in calcium or aluminum melt

Preparation of Monophasic Tungsten boride powder from Tungsten and boron carbide

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Low temperature controllable synthesis of transition metal and rare earth borides mediated by molten salt

Synthesis of Aluminium Borate Nanowires by Sol–gel Method

A New Sight on The Influence of Molten Salt in The Preparation of (Ta, Nb, Ti) C Nano‐Powder

Morphology-controlled Synthesis of CdWO_4 Nanocrystals

Sol-gel synthesis and characterization of tungsten-molybdenum solid solution nanoparticles

Low temperature synthesis of high‐entropy (Hf0.2Ti0.2Mo0.2Ta0.2Nb0.2)B2 powders combined with theoretical forecast of its elastic and thermal properties

Effects of Ph and Salinity on the Hydrothermal Transport of Tungsten: Insights from in Situ Raman Spectroscopic Characterization of K2WO4-NaCl-HCl-CO2 Solutions at Temperatures Up to 400°C

Low-temperature synthesis of nanosized metal borides through reaction of lithium borohydride with metal hydroxides or oxides

Synthesis of zirconium boride (ZrB2) rod crystals through salt-assisted boro/carbothermal reduction

Preparation of ultrafine (W,Mo)B, (W,Mo)B2.5 and (Mo,W)AlB solid solution composite powders

Low Temperature Synthesis of ZnNb2O6 Fine Powders by Wet-Chemical Processes