Abstract:Boron is an essential solute element for improving the grain boundary strength in several high temperature metallic alloys especially in Ni- and Co-base superalloys although the detailed strengthening mechanisms are still not well understood. In superalloys, boron leads to the formation of borides and precipitate depleted zones around the grain boundaries and alters the bond strength among the grains directly. In this paper, we explore in detail the role of the boron content in ternary γ/γ′ Co-9Al-9W alloys. Local as well as bulk mechanical properties were evaluated using nanoindentation and compression testing and correlated to near-atomic scale microstructure and compositions obtained from electron microscopy and atom probe tomography. The alloy variant with low B content (0.005 at.% B) reveals an increase in yield strength at room temperature and 600 °C and atom probe tomography investigations show that solute B segregates to the grain boundaries. However, in the bulk B exclusively partitions to the γ′ phase. Additionally, the γ′/γ′ grain boundaries are depleted in W and Al with the concentration locally shifted towards the γ composition forming a very thin γ layer at the γ′/γ′ grain boundaries, which supports dislocation mobility in the γ′/γ′ grain boundary region during deformation. Higher content of B (0.04 at.% B) promotes formation of W-rich borides at the grain boundaries that leads to undesirable precipitate depleted zones adjacent to these borides that decrease the strength of the alloy drastically. However, it was also found that a subsequent annealing heat treatment eliminates these detrimental zones by re-precipitating γ′ and thus elevating the strength of the alloy. This result shows that, if a precipitate depleted zone can be avoided, B significantly improves the mechanical properties of polycrystalline Co-base superalloys by strengthening the γ′ phase and by improving grain boundary cohesion.

Preparation of ultrafine (W,Mo)B, (W,Mo)B2.5 and (Mo,W)AlB solid solution composite powders

Size-controlled preparations of tungsten and molybdenum borides in calcium or aluminum melt

Preparation of fine-grained MoW solid solution alloys with excellent performances

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

Preparation of Monophasic Tungsten boride powder from Tungsten and boron carbide

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

Synthesis of high entropy monoboride (Mo0.25W0.25Cr0.25Ta0.25)B powders with abundant twins from oxides

Stabilizing MoB2 with HCP structure in (MoxHf(1‒x)/5Zr(1‒x)/5Ta(1‒x)/5V(1‒x)/5Nb(1‒x)/5)B2 via a high‐entropy strategy

Morphology and microstructure of Fe–Cr–W–B alloy powders prepared by argon gas atomization

Preparation and properties of W-Mo-Cu composite using solution combustion synthesized W Mo solid solution nanopowder

Influence of Length-Scale on Stabilization of Boron Carbide in Al-based Metal Matrix Composites During Plasma Activated Sintering

Preparation of Ultrafine Tungsten-Molybdenum Composite Powder and Its Sintering Behavior

Dissolving and Stabilizing Soft WB2 and MoB2 Phases into High-Entropy Borides via Boron-Metals Reactive Sintering to Attain Higher Hardness

Enhanced hardness in tungsten–substituted molybdenum diboride solid solutions by local symmetry reduction

Microstructure Evolution of 15wt% Boron Carbide/Aluminum Composites During Liquid-Stirring Process

On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys

Synthesis of Al2O3-WSi2-WB2-WB composite in Al-Si-WO3-B2O3 system by self-propagating high-temperature synthesis

Tracking the evolution of microstructure and phases of WCoB-Co cermets during sintering

Microstructure and some properties of powder-pack borided Ti–5Mo–5V–8Cr–3Al alloy with special attention to the microstructure at the interface TiB/substrate

Preparation and characterization of TiB2-Al2O3 composite powder by combustion synthesis process

Preparation and Characterization of TiB2/Al3Ti/Al2O3 Composite Nano-powder