Abstract:Chemical complex borohydride is a promising hydrogen storage material due to its large gravimetric and volumetric hydrogen capacities. However, the high dehydrogenation temperature and sluggish kinetics still place strong restrictions on its practical application in the hydrogen storage field. In this work, a synergetic approach of partial cation substitution and catalysis is developed to enhance the hydrogen storage properties of LiBH4. The Li/Mg based dual-cation borohydride (LiMg2(BH4)5, LMBH) was successfully synthesized by wet chemical ball milling of LiBH4 and MgCl2. The optimal (LMBH (4.5:1) sample, LiBH4 and MgCl2 in molar ratios of 4.5:1, possesses a maximum hydrogen desorption capacity (11.27 wt%) and the outstanding initial decomposition temperature (∼250 °C). Importantly, the LMBH (4.5:1) doped with TiF3 shows a remarkable onset dehydrogenation temperature as low as 97.2 °C, which is about 190 °C lower than that of pristine LiBH4. The LMBH (4.5:1) doped with TiF3 system releases 7.98 wt% H2 within 170 min below 350 °C. And the dehydrogenation product of doped composite can reversibly absorb ∼4.72 wt% H2 at a relatively moderate temperature of 280 °C, which is substantially lower than the reversible hydrogen absorption temperature of previous modified borohydride systems. Based on the structural characteristic analyses, the TiF3 reacts with LMBH (4.5:1) to in-situ form actual catalytic components of TiB2 and TiH2 as the actual catalysts for LMBH (4.5:1), resulting in the improved hydrogen re/dehydrogenation properties. The synergetic modification of Li/Mg dual-cation substitution and TiB2/TiH2 catalysis may lead to the development of light-metal borohydrides with outstanding hydrogen storage properties.

Low-temperature synthesis of nanosized metal borides through reaction of lithium borohydride with metal hydroxides or oxides

Low-temperature Synthesis of TiB2 Nanocrystals Using TiO2 ,LiBH4 and Mg

A Low-Temperature Route for the Synthesis of Nanocrystalline LaB6

Room-Temperature Synthesis of BaTiO<sub>3</sub>Nanoparticles in Large Batches

A Novel Low Temperature Synthesis of Pure LaB6 Powder by Solid-State Reduction Reactions Involving La2O3 and B2O3

Synthesis of superfine high-entropy metal diboride powders

A solid-state reaction route to prepare LaB6 nanocrystals in vacuum

In Situ Formation of TiB2 and TiH2 Catalyzed Li/Mg Based Dual-Cation Borohydride with a Low Onset Dehydrogenation Temperature below 100 °C

LOW-TEMPERATURE PREPARATION OF NANO-CRYSTALLINE LITHIUM NIOBATE POWDERS BY THE POLYMERIC PRECURSOR METHOD

Significant Destabilization Effects of Metal Borides on LiBH4

Efficient Synthesis of Orthorhombic Lithium Borate Hydroxide Micro-Rods and Their Thermal Conversion to Lithium Borate

Synthesis of Aluminium Borate Nanowires by Sol–gel Method

Low-temperature combustion synthesis of nanometer tetragonal barium titanate powders

Low-temperature synthesis of superconducting nanocrystalline MgB2

Synthesis of Boron and Boride Compounds Nanowire Arrays by Chemical Vapor Deposition

Low temperature synthesis of high‐entropy (Hf0.2Ti0.2Mo0.2Ta0.2Nb0.2)B2 powders combined with theoretical forecast of its elastic and thermal properties

Synthesis of high entropy monoboride (Mo0.25W0.25Cr0.25Ta0.25)B powders with abundant twins from oxides

Direct Synthesis of Barium Zirconate Titanate (BZT) Nanoparticles at Room Temperature and Sintering of Their Ceramics at Low Temperature

Process analysis and mechanism investigation of low temperature synthesis of nanoscale calcium hexaboride powder.

Reaction Pathway Analysis of B/Li2O in a Li–B–O System for Boron Nitride Nanotube Growth

Low-temperature synthesis of high-purity TiB2 via carbothermal reduction of metatitanic acid and H3BO3