Abstract:With high reversible capacities of more than 200 mAh/g, Ni-rich layered oxides Li[NixCoyMn1−x−y]O2 (x ≥ 0.6) serve as the most promising cathode materials for lithium-ion batteries (LIBs). However, the anisotropic lattice volume changes linked to their α-NaFeO2 structured crystal grains bring about poor cycle performances for conventionally produced NCM materials. To deal with these issue, single-crystal pm-sized LiNi0.8Co0.1Mn0.1O2 rods was synthesized by a hydrothermal method. Compared with conventional synthesis methods, these LiNi0.8Co0.1Mn0.1O2 rods were calcined at a low temperature with excessive lithium sources, which not only reduces the sintering temperature but also ensures the mono-dispersed micrometer-scaled particle distribution. When used as the cathode material for LIBs, the as-prepared LiNi0.8Co0.1Mn0.1O2, with ordered layered-structure and low degree of cation mixing, shows excellent electrochemical performances. When sintered at 750 °C with 50% Li-excess, the cathode material delivered an initial discharge capacity of 226.9 mAh/g with Coulombic efficiency of 91.2% at 0.1 C (1 C = 200 mA/g) in the voltage range of 2.8–4.3 V. When charge-discharged at 1 C for 100 cycles, discharge capacity of 178.1 mAh/g with the capacity retention of 95.1% are still obtained. The cycling stability at high cut-off voltage is also outstanding. These superior electrochemical properties should be related to the monodispersed micron scaled morphology which not only decreases the contact area between electrode and electrolyte but also mitigates the formation of microcracks. This low-temperature strategy of synthesizing single-crystal LiNi0.8Co0.1Mn0.1O2 rods should be able to provide a feasible method for synthesizing other single-crystal Ni-rich cathode materials with excellent electrochemical performances for LIB.

Efficient Synthesis of Orthorhombic Lithium Borate Hydroxide Micro-Rods and Their Thermal Conversion to Lithium Borate

Low-temperature synthesis of nanosized metal borides through reaction of lithium borohydride with metal hydroxides or oxides

Facile thermal conversion route synthesis, characterization, and optical properties of rod-like micron nickel borate

Hydrothermal Synthesis and Electrochemical Behavior of Nanosized Orthorhombic Limno2

Synthesis of Magnesium Borate Nanorods by Sol-Gel Process

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

From Cobalt Nitrate Carbonate Hydroxide Hydrate Nanowires To Porous Co3o4 Nanorods For High Performance Lithium-Ion Battery Electrodes

Facile Synthesis of Hierarchically Porous Li4Ti5O12 Microspheres for High Rate Lithium Ion Batteries

The Electrochemical Characterization of Lithium Bis( Oxalato) Borate Synthesized by A Novel Method

Hydrothermal Synthesis and Characterization of Magnesium Borate Hydroxide Nanowhiskers

One-Step Synthesis of Titanium Oxyhydroxy-Fluoride Rods and Research on the Electrochemical Performance for Lithium-ion Batteries and Sodium-ion Batteries

Controllable Synthesis of Elongated Hexagonal Bipyramid Shaped La(OH) 3 Nanorods and the Distribution of Electric Property by Off-Axis Electron Holography

Controlled synthesis of α-FeOOH nanorods and their transformation to mesoporous α-Fe2O3, Fe3O4@C nanorods as anodes for lithium ion batteries

Facile Controlled Synthesis of Spinel LiMn2O4 Porous Microspheres as Cathode Material for Lithium Ion Batteries

Hydrothermal synthesis of orthorhombic LiMnO<sub>2</sub> nano-particles and LiMnO<sub>2</sub> nanorods and comparison of their electrochemical performances

Controlled Synthesis of Hierarchical CoxMn3−xO4array Micro-/Nanostructures with Tunable Morphology and Composition As Integrated Electrodes for Lithium-Ion Batteries

3D LiCoO2 Nanosheets Assembled Nanorod Arrays Via Confined Dissolution-Recrystallization for Advanced Aqueous Lithium-Ion Batteries

Chemical synthesis of stoichiometric lithium niobate powders

Low-temperature strategy to synthesize single-crystal LiNi0.8Co0.1Mn0.1O2 with enhanced cycling performances as cathode material for lithium-ion batteries

Mechanical Milling Assisted Synthesis and Electrochemical Performance of High Capacity LiFeBO3 for Lithium Batteries

Self-Catalytic Growth of Aluminum Borate Nanowires