Abstract:Orthorhombic LiMnO2 (o-LiMnO2) particles of nano-sized grain were successfully synthesized using a two-step liquid phase thermal process at low temperature. Trimanganese tetraoxide (Mn3O4) particles as a precursor for o-LiMnO2 were prepared via a solvothermal route, in which potassium permanganate (KMnO4) powder was reduced with a primary alcohol, e.g., CH3OH or CH3CH2OH. And a hydrothermal process in lithium hydroxide aqueous solution at 160–180 °C was utilized to transform Mn3O4 particles to nanocrystalline o-LiMnO2. The electrochemical characterization of as-synthesized o-LiMnO2 particles as cathode materials for assembled Li/o-LiMnO2 cells by cycling galvanostatically in the voltage range of 2.0–4.3 V vs. Li+/Li at a current density of 20 mA g−1 at room temperature, indicated that the initial specific capacity was about 225 mA h g−1 and the specific capacity increased to 232 mA h g−1 after several cycling. A coulombic efficiency of more than 95% was achieved, and the discharge capacity of over 30 cycles could be more than 182 mA h g−1. The electrochemical capacity and its retention behavior improved presumably due to smaller particle size and high crystallinity, and thus suggested that as-developed two-step liquid phase thermal process could be a promising method for readily synthesizing highly ordered o-LiMnO2 phase of good electrochemical performances.

Hydrothermal Synthesis and Electrochemical Behavior of Nanosized Orthorhombic Limno2

Hydrothermal Synthesis of Layer LiMnO2

Low temperature hydrothermally synthesized nanocrystalline orthorhombic LiMnO

A simple and facile one-step strategy to synthesize orthorhombic LiMnO 2 nano-particles with excellent electrochemical performance

Hydrothermal synthesis of orthorhombic LiMnO 2 nano-particles and LiMnO 2 nanorods and comparison of their electrochemical performances

Hydrothermal synthesis of orthorhombic LiMnO<sub>2</sub> nano-particles and LiMnO<sub>2</sub> nanorods and comparison of their electrochemical performances

Preparation, Microstructure And Electrochemical Properties Of Spherical-Like Orthorhombic Limno2

Low temperature hydrothermally synthesized nanocrystalline orthorhombic LiMnO2 cathode material for lithium-ion cells

A facile hydrothermal approach to synthesize nanosized single-crystal LiMn2O4 with high rate capability

Synthesis of spinel LiMn2O4 nanoparticles through one-step hydrothermal reaction

Nanocrystalline Orthorhombic LiMnO2 Cathode Materials Synthesized by a Two-Step Liquid-Phase Thermal Process

Phase Transformations And Activation Characteristics Of Layered Orthorhombic Limno2 During Electrochemical Cycling

Facile Hydrothermal Synthesis and Electrochemical Properties of Orthorhombic LiMnO 2 Cathode Materials for Rechargeable Lithium Batteries

Electrochemical Performance of Nanosized LiMn2O4 for Lithium-Ion Batteries

Synthesis and Structure Transformation of Orthorhombic Limno2 Cathode Materials by Sol-Gel Method

Synthesis and Electrochemical Properties of Nanostructured LiMn2O4 for Lithium-Ion Batteries

Phase Conversion and Morphology Evolution During Hydrothermal Preparation of Orthorhombic LiMnO2 Nanorods for Lithium Ion Battery Application

Hydrothermal Synthesis of Flower-Like LiMnPO4nanostructures Self-Assembled with (010) Nanosheets and Their Application in Li-ion Batteries

Microstructure and Electrochemical Characterization of Spherical-Like Orthorhombic LiMnO2 Via Co-Precipitation

One-Step Synthesis Limn2o4 Cathode by A Hydrothermal Method

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries