Abstract:How to improve the specific power density of the rechargeable lithium ion battery has recently become one of the most attractive topics of both scientific and industrial interests. The spinel LiMn2O4 is the most promising candidate as a cathode material because of its low cost and nontoxicity compared with commercial LiCoO2. Moreover, nanostructured electrodes have been widely investigated to satisfy such industrial needs. However, the high-temperature sintering process, which is necessary for high-performance cathode materials based on high-quality crystals, leads the large grain size and aggregation of the nanoparticles which gives poor lithium ion battery performance. So there is still a challenge to synthesize a high-quality single-crystal nanostructured electrode. Among all of the nanostructures, a single crystalline nanowire is the most attractive morphology because the nonwoven fabric morphology constructed by the single crystalline nanowire suppresses the aggregation and grain growth at high temperature, and the potential barrier among the nanosize grains can be ignored. However, the reported single crystalline nanowire is almost the metal oxide with an anisotropic crystal structure because the cubic crystal structure such as LiMn2O4 cannot easily grow in the one-dimentional direction. Here we synthesized high-quality single crystalline cubic spinel LiMn2O4 nanowires based on a novel reaction method using Na0.44MnO2 nanowires as a self-template. These single crystalline spinel LiMn2O4 nanowires show high thermal stability because the nanowire structure is maintained after heating to 800 degrees C for 12 h and excellent performance at high rate charge-discharge, such as 20 A/g, with both a relative flat charge-discharge plateau and excellent cycle stability.

Synthesis of Highly Crystalline Spinel Limn2o4 by A Soft Chemical Route and Its Electrochemical Performance

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Synthesis Spinel Limn2o4 With Manganese Carbonate Prepared By Microemulsion Method

Synthesis and Electrochemical Characteristics of Spinel Limn2o4 Via A Precipitation Spray-Drying Process

Synthesis of Spinel Limn2o4 for Li-Ion Batteries Via Sol-Gel Process

Preparation of Limn2o4 with an Enhanced Performance by Mixed Liquid and Mechanical Activations

Hydrothermal Synthesis and Electrochemical Behavior of Nanosized Orthorhombic Limno2

From Hydrated Layered-Spinel Lithium Manganate Composite to High-Performance Spinel Limn2o4: A Novel Synthesis Tuned by the Concentration of Lioh

Microemulsion‐Assisted Synthesis of Nanosized LiMnO Spinel Cathodes for High‐Rate Lithium‐Ion Batteries

Synthesis and Electrochemical Properties of Sc-Doped Li1.05scxmn2-Xo4 Spinel As Cathodic Material for Rechargeable Li-Battery

Preparation of Spinel LiMn2O4 from Manganese Oxide and Its Electrochemical Performance

One-Step Synthesis Limn2o4 Cathode by A Hydrothermal Method

LIMN2O4 SPINEL DIRECT SYNTHESIS AND LITHIUM ION SELECTIVE ADSORPTION

Synthesis and Electrochemical Performance of LiNi0.5Mn1.5O4 Spinel Compound

Optimum Synthesis of Spinel Phase LiMn_2O_4 by Rheological Phase Reaction Method

Electrochemical Performance of Nanosized LiMn2O4 for Lithium-Ion Batteries

Synthesis And Electrochemical Performance Of Linixmn2-Xo4 Spinel As Cathode Material For Lithium Ion Batteries

Synthesis of Single Crystalline Spinel Limn2o4 Nanowires for A Lithium Ion Battery with High Power Density

Novel Synthesis Process and Structural Characterization of Li–Mn–O Spinels

Electrochemical performance of LiMn2O4 synthesized from precursor Mn3O4

Synthesis of porous Mn-based spinel microspheres with enhanced lithium storage properties