Abstract:Mn-based spinel materials MgMn 2 O 4 with porous structure were synthesized by reverse coprecipitation method at annealing temperature of 700–900 °C. The as-synthesized samples were compared with those prepared by solid-state reaction method. The phase, micro-morphology and cation distribution of spinel materials were studied by using X-ray powder diffraction, scanning electron microscope, transmission electron microscope and X-ray photoelectron spectroscopy. The results show that the MgMn 2 O 4 samples obtained by reverse coprecipitation method are porous microspheres, and the particle size of the samples grows with the increase of annealing temperature. The material annealed at 700 °C has the most regular morphology, and the microspheres with a diameter of about 2 μm are assembled from uniform nanoparticles (50–60 nm). X-ray photoelectron spectroscopy analysis show that all samples are mixed spinel, Mn exists in multivalent state, Mn 2+ ions occupy tetrahedral sites and Mn 3+ / Mn 4+ ions occupy octahedral sites of spinel structure. The effects of synthesis conditions on the inversion degree (ν) of MgMn 2 O 4 spinel were discussed. As the anode material of Li-ion batteries, the sample annealed at 700 °C shows the best electrochemical performance, and the lithium storage capacity in the first cycle is 1037.8 mAhg −1 . The enhanced lithium storage properties of the anode material are due to its regular porous microsphere structure, which is conductive to contact between the electrode materials and electrolyte and improves the migration of lithium ions. In addition, the relationship between cation distribution in spinel structure and electrochemical properties was also discussed.

Synthesis of Spinel Limn2o4 for Li-Ion Batteries Via Sol-Gel Process

Preparation of Spinel LiMn_2O_4 Cathode Materials for Li-ion Batteries Based on Sol-gel Process

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Preparation of LiMn_2O_4 for lithium ion batteries by sol-gel method

Synthesis of Highly Crystalline Spinel Limn2o4 by A Soft Chemical Route and Its Electrochemical Performance

Spinel Li1 + Xmn2o4 Synthesized by Coprecipitation As Cathodes for Lithium-Ion Batteries

Preparation of Spherical Spinel LiMn<sub>2</sub>O<sub>4</sub> Cathode Material for Lithium Ion Batteries

Synthesis Spinel Limn2o4 With Manganese Carbonate Prepared By Microemulsion Method

Synthesis and Electrochemical Performance of LiNi0.5Mn1.5O4 Spinel Compound

Synthesis And Electrochemical Performance Of Linixmn2-Xo4 Spinel As Cathode Material For Lithium Ion Batteries

Preparation of Limn2o4 with an Enhanced Performance by Mixed Liquid and Mechanical Activations

Synthesis Conditions Of Limn2o4 Prepared By Molten Salt Method

Unraveling the Mechanism and Practical Implications of the Sol-Gel Synthesis of Spinel LiMn2O4 as a Cathode Material for Li-Ion Batteries: Critical Effects of Cation Distribution at the Matrix Level

Spherical spinel LiMn2O4 preparation and its electrochemical performance improvement

Synthesis and Electrochemical Characteristics of Spinel Limn2o4 Via A Precipitation Spray-Drying Process

Optimum Synthesis of Spinel Phase LiMn_2O_4 by Rheological Phase Reaction Method

Preparation of spherical spinel LiMn 2O 4 cathode material for lithium ion batteries

Synthesis of porous Mn-based spinel microspheres with enhanced lithium storage properties

One-step Synthesis and Effect of Heat-Treatment on the Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

Preparation of Spinel LiMn2O4 from Manganese Oxide and Its Electrochemical Performance

Synthesis and performance of S-Co co-doped LiMn2O4