Abstract:Spinel lithium manganese oxide cathode materials were synthesized using the ultrasonic-assisted sol-gel method. The synthesized samples were investigated by differential thermal analysis (DTA) and thermogravimetry (TG), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), and the charge-discharge test. TG-DTA shows that significant mass loss occurs in two temperature regions during the synthesis of LiLa0.01Mn1.99O3.99F0.01. XRD data indicate that all samples exhibit the same pure spinel phase, and LiLa0.01Mn1.99O3.99F0.01 and LiLa0.01Mn1.99O4 samples have a better crystallinity than LiMn2O4. SEM images indicate that LiLa0.01Mn1.99O3.99F0.01 has a slightly smaller particle size and a more regular morphology structure with narrow size distribution. The charge-discharge test reveals that the initial capacities of LiMn2O4, LiLa0.01Mn1.99O4, and LiLa0.01Mn1.99O3.99F0.01 are 130, 123, and 126 mAh·g1, respectively, and the capacity retention rates of the initial value, after 50 cycles, are 84.8%, 92.3%, and 92.1%, respectively. The electrode coulomb efficiency and CV reveal that the electrode synthesized by the ultrasonic-assisted sol-gel (UASG) method has a better reversibility than the electrode synthesized by the sol-gel method.

Optimum Synthesis of Spinel Phase LiMn_2O_4 by Rheological Phase Reaction Method

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Optimization of Spinel Li[sub 1+x]Mn[sub 2−y]O[sub 4] as a 4 V Li-Cell Cathode in Terms of a Li-Mn-O Phase Diagram

Optimization Of Spinel Li1+Xmn2-Yo4 As A 4 V Li-Cell Cathode In Terms Of A Li-Mn-O Phase Diagram

Synthesis of LiNi0.65Co0.25Mn0.1O 2 as cathode material for lithium-ion batteries by rheological phase method

Electrochemical performance of LiMn2O4 synthesized from precursor Mn3O4

Preparation of Spinel LiMn2O4 from Manganese Oxide and Its Electrochemical Performance

Synthesis and Electrochemical Characterizations of Spinel LiMn2O4 by Citric Acid-Assisted Sol-Gel Method

Spinel Li1 + Xmn2o4 Synthesized by Coprecipitation As Cathodes for Lithium-Ion Batteries

Synthesis and Physicochemical Properties of LiLa0.01Mn1.99O3.99F0.01 Cathode Materials for Lithium Ion Batteries

Synthesis and Electrochemical Performance of LiNi0.5Mn1.5O4 Spinel Compound

Controllable synthesis of spinel lithium nickel manganese oxide cathode material with enhanced electrochemical performances through a modified oxalate co-precipitation method

Synthesis and Electrochemical Properties of Nanostructured LiMn2O4 for Lithium-Ion Batteries

Electrochemical Study on LiMn2O4 As Cathode Material for Lithium Ion Batteries

Studies on synthesis of cathode material LiMn2O4 for lithium-ion batteries and it's electrochemical performance

Studies on an LiMnO Spinel System (obtained by Melt-Impregnation) As a Cathode for 4 V Lithium Batteries Part 1. Synthesis and Electrochemical Behaviour of LixMn2O4

Preparation of LiMn2O4 by two methods for lithium ion batteries

Studies on Synthesis of Cathode Material LiMn2O4 for Lithium-Ion Batteries and It's Electrochemical

Preparation of Spherical Spinel LiMn<sub>2</sub>O<sub>4</sub> Cathode Material for Lithium Ion Batteries

Synthesis and Electrochemical Properties of Spinel Lico1/6mn11/6o4 Powders by A Spray-Drying Method

Synthesis And Electrochemical Performance Of Linixmn2-Xo4 Spinel As Cathode Material For Lithium Ion Batteries