Abstract:The mechanism for the formation of a spinel compound from the reaction of LiNO3 with a high density γ-MnOOH is extensively investigated in terms of pore-size distribution, X-ray diffraction, thermal and chemical analyses. The reaction of MnOOH with LiNO3 at about 300°C yields a product that consists of domains of lithiated MnO2 phase with an approximate composition of Li0.3MnO2. This product ultimately transforms to a disordered spinel phase of composition LiMn2O4 + y at 300–400°C. The disordered spinel is converted to a well-ordered as the temperature is raised above 550°C. The oxygen content depends on the final heating temperature and atmosphere. Compounds obtained at high temperature, or in N2, have a large capacity and unstable rechargeability. By contrast, some compounds prepared at low temperature, or with a slightly high lithium content in the starting materials, exhibit an improvement in rechargeability. The possible cause for the differences in electrochemical characteristics of both types of compound is proposed.

Studies on an LiMnO Spinel System (obtained by Melt-Impregnation) As a Cathode for 4 V Lithium Batteries Part 1. Synthesis and Electrochemical Behaviour of LixMn2O4

Studies on LiMnO spinel system (obtained from melt-impregnation method) as a cathode for 4 V lithium batteries Part II. Optimum spinel from γ-MnOOH

Studies on the LiMnO spinel system (obtained from melt-impregnation method) as positive electrodes for 4 V lithium batteries. Part III. Characterization of capacity and rechargeability

Preparation of Cathode Materials for Lithium Batteries by Melt Impregnation Method .1. Preparation of Spinel Limn2o(4)

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Studies on Li-Mn-O Spinel System (obtained from Melt-Impregnation Method) As a Cathode for 4 V Lithium Batteries Part IV. High and Low Temperature Performance of LiMn2O4

Dependence of Battery Performance of Spinel Li{sub 1+x}mn{sub 2}o{sub 4} on the Preparation Method

Dependence of Battery Performance of Spinel Li1+XMn2O4 on the Preparation Method

Synthesis And Electrochemical Performance Of Linixmn2-Xo4 Spinel As Cathode Material For Lithium Ion Batteries

Optimization of Spinel Li[sub 1+x]Mn[sub 2−y]O[sub 4] as a 4 V Li-Cell Cathode in Terms of a Li-Mn-O Phase Diagram

Preparation of Spinel LiMn2O4 from Manganese Oxide and Its Electrochemical Performance

Spinel Li1 + Xmn2o4 Synthesized by Coprecipitation As Cathodes for Lithium-Ion Batteries

Optimization Of Spinel Li1+Xmn2-Yo4 As A 4 V Li-Cell Cathode In Terms Of A Li-Mn-O Phase Diagram

Electrochemical Study on LiMn2O4 As Cathode Material for Lithium Ion Batteries

Changes in Mn3+/Mn4+ Ratio, Resistance Values in Electrochemical Impedance Spectra, and Rate Capability with Increased Lithium Content in Spinel LixMn2O4

Preparation of Spherical Spinel LiMn<sub>2</sub>O<sub>4</sub> Cathode Material for Lithium Ion Batteries

Spray-drying method to synthesis LiMn1.5Ni0.5O4 and its electrochemical characteristics as a cathode material

Optimum Synthesis of Spinel Phase LiMn_2O_4 by Rheological Phase Reaction Method

Microemulsion‐Assisted Synthesis of Nanosized LiMnO Spinel Cathodes for High‐Rate Lithium‐Ion Batteries

Preparation of Li1+Y-Xznxmn2-Yo4 Spinel As A Cathode Material for Li+-Batteries

IR Investigation and Electrochemical Properties of Li-doped Spinel Li 1 + x Mn 2 – x O 4 Prepared by a Simplified Technique