Abstract:This paper introduces the boron/carbon thermal reduction reaction, represented by the equation 2Ta 2 O 5 + B 4 C + 11 C = 2TaB 2 + 2TaC + 10CO (g), as a novel reaction pathway for synthesizing TaB 2 −TaC composite powders. Subsequently, the SPS technique is employed for the fabrication of TaB 2 -TaC composite ceramics via sintering. The article begins by elucidating the fundamental process of this reaction and constructing a phase diagram through thermodynamic calculations. The experimental results demonstrate that adjusting the synthesis temperature and the proportion of the boron source in the raw materials enables effective control over the ratio of the two phases within the composite materials, allowing the TaB 2 phase content to be tailored within the range of 38.1–60 %. Moreover, elevating the synthesis temperature and increasing the proportion of the boron source effectively mitigate the C,O impurity content in the composite powders and facilitate the TaB 2 step-growth process. It is noteworthy that the hardness of TaB 2 -TaC composite ceramics sintered at 2000°C using the optimized complex-phase powder as the precursor reaches 21.7±0.5 GPa, and the fracture toughness attains 5.2±0.2 MPa⋅m 1/2 .

Low-temperature synthesis of high-purity TiB2 via carbothermal reduction of metatitanic acid and H3BO3

Low-temperature Synthesis of TiB2 Nanocrystals Using TiO2 ,LiBH4 and Mg

Low‐temperature Synthesis of Ultrafine TiB2 Nanopowders by Molten‐salt Assisted Borothermal Reduction

Low-Temperature High-Efficiency Preparation of TiB 2 Micro-Platelets via Boro/Carbothermal Reduction in Microwave Heated Molten Salt.

Carbothermal Preparation of Ultra-Fine TiB2 Powders Using Solution-Derived Precursors Via Sol-Gel Method

Hydrothermal synthesis of high-purity BaTiO3 powders: control of powder phase and size, sintering density, and dielectric properties

The Low Temperature Synthesis and Characterization of Bi3.25la0.75ti3o12 Powder by Hydroxide Coprecipitation in Aqueous Medium

A Quantitative Study of the Synthesis of TiB2 Particles Via Salts-Metal Reaction at Different Temperatures

Synthesis of High‐purity High‐entropy Metal Diboride Powders by Boro/carbothermal Reduction

A convenient solid-state reaction route to nanocrystalline TiB2

Preparation of titanium carbide powders by sol–gel and microwave carbothermal reduction methods at low temperature

Low-temperature synthesis of nanosized metal borides through reaction of lithium borohydride with metal hydroxides or oxides

A Facile One-Step Route to Nanocrystalline TiB2 Powders

A novel simple method to stably synthesize Ti3AlC2 powder with high purity

Low-temperature Preparation of Pure BaTiO_(3) by SAG Method

Synthesis of TaB 2 -TaC nanocomposite powders by a boro-carbothermal reduction route

Synthesis of Stoichiometric Titanium Carbide by a Combination of Carbothermal Reduction and Molten Salt Method and Its Characterization

A New Method for Synthesizing Li2.06nb0.18ti0.76o3 Powder at Low Temperatures

Synthesis of nanocrystalline TiB2 powder from TiO2, B2O3 and Mg reactants through microwave-assisted self-propagating high-temperature synthesis method

Synthesis of Ti3SiC2 Bulk Materials with B2O3 Additive

Preparation of Titanium Carbide by Carburisation of Titanium Dioxide