Abstract:Single-crystalline perovskite BaTiO3 (BTO) nanorods were synthesized by (BaTi2O5-template) molten salt synthesis (MSS) methods. The effects of process parameters (eg, calcination temperature, reaction time, molten salt content, as well as different phase structures of TiO2 and barium oxides) on the formation of BTO nanorods and their structural characteristics were systematically investigated. The BTO nanorods synthesized at 800 degrees C for 5 hours by MSS method with the molar salt ratios of BaCO3:TiO2 (anatase):NaCl:KCl equal to 1:1:60:60, exhibited smooth and clean surfaces through their lengths. Their diameters were in the range of 130-200 nm with average length of 5 mu m. Large-scale amount of BTO nanorods was synthesized by BaTi2O5-template MSS method at 650 degrees C with molar salt ratios of BaC2O4:BaTi2O5 (template):NaCl:KCl equal to 1:1:60:60. The BTO nanorods successfully retained the one-dimensional morphology of the BaTi2O5 templates and their lengths were in the range of 5-10 mu m with an average diameter of similar to 300 nm. The single-crystalline nature of individual BTO nanorod was revealed by its selected area electron diffraction patterns and high-resolution TEM images. The BTO nanorods exhibited good optical properties with optical bandgaps in the range of 2.5-2.6 eV. Such optical bandgaps make the present BTO nanorods promising candidates for ferroelectric photovoltaic devices. Dielectric properties of the BTO nanorods synthesized by MSS method were comparatively investigated with the BTO nanorods synthesized by the BaTi2O5-template MSS method. It is found that the later BTO nanorods exhibit better dielectric properties and their synthesized temperature is also much lower than the former ones.

Molten salt synthesis of rod-like tungsten bronze niobate particles

Molten Salt Synthesis of ZnNb{sub 2}o{sub 6} Powder

Wire Structure and Morphology Transformation of Niobium Oxide and Niobates by Molten Salt Synthesis

Morphological Control of Ba-Ti-O Particles Prepared by Molten Salt Synthesis

Mechanochemical synthesis of sodium tungsten bronze nanocrystalline powders

Molten Salt Synthesis of Bismuth Ferrite Nano‐ and Microcrystals and Their Structural Characterization

Room-Temperature Synthesis of BaTiO<sub>3</sub>Nanoparticles in Large Batches

Synthesis of complex niobate nanostructures via molten-salt reaction: Effect of ZrO 2 on product morphology

Mechanism of the formation, growth and transformation of BaTi2O5 nanorods synthesized by one-step in molten-salts

Molten-salt Synthesis of BaTiO3 Powders and Their Atomic-Scale Structural Characterization

A single-source molten salt synthesis of uniform octahedral Na2Ti3O7 particels composed of nanorods

Synthesis Of Nio Nano-Crystal Powders By Molten Salt Method

Facile thermal conversion route synthesis, characterization, and optical properties of rod-like micron nickel borate

Key to Enhance Thermoelectric Performance by Controlling Crystal Size of Strontium Titanate

Molten salt synthesis of Ni 0.5Zn 0.5Fe 2O 4 ferrites

Chemical synthesis and electronic conduction properties of sodium and potassium tungsten bronzes

Low Temperature Tetragonal Tungsten Bronze Oxides for Li-ion Storage

Electrochemical Synthesis of Nb-Doped BaTiO3 Nanoparticles with Titanium-Niobium Alloy as Electrode

Synthesis of Stoichiometric LiNbO3 Nanopowder Through a Wet Chemical Method.

Molten Salt Synthesis of BaTiO3 Nanorods: Dielectric, Optical Properties, and Structural Characterizations

The Ba2LnFeNb4O15 Tetragonal Tungsten Bronze: towards RT composite multiferroics